18_
operating
operating basic function
SELECTING OPERATION MODE
Heat
The air conditioner heats as well as cools. Warm your room with this versatile appliance in the
cold of winter.
1.
Turn on the air conditioner.
Press the
Power
button on the remote control.
2.
Set the operating mode.
Press the
Mode
button on the remote control until
Heat mode indicator appears on the remote control
display.
The air conditioner operates in Heat mode and warms
your room.
Each time you press the
Mode
button, the mode will change in order of Auto, Cool, Dry,
Fan and Heat.
3.
Set the temperature.
Press the
Temp
or
button on the remote control
to increase or decrease the desired temperature.
You can set the desired temperature between
the range of 16˚C~30˚C.
You can increase/decrease the temperature by 1˚C.
4.
Set the fan speed.
Press the
Fan
or
button on the remote control to
set the desired fan speed.
If room temperature reaches desired value, heating will
stop for a while.
• Each time you press the
Fan
or
button, fan
speed will change in order of Auto, Silence,Low,
Medium and High.
• Fan may not operate for about 3~5 minutes at the
beginning to prevent any cold blasts while the air
conditioner is warming up.
•
Air flow can be adjusted manually (see page 19 for instructions).
•
Since the air conditioner heats the room by taking heat energy from outdoor air, the
heating capacity may decrease when outdoor temperature is extremely low.
Use an additional heating appliance in combination with the air conditioner if you feel the
air conditioner heats insufficiently.
•
Press the
Temp/Humi
button on the remote control to check the temperature and
humidity level in a room.
•
Silence mode(
) makes the noise quieter during operating the indoor unit in the
Heat mode.
Summary of Contents for AQV09ABAX
Page 1: ......
Page 37: ...memo _37 ENGLISH...
