Samsung AQ12WHWE, Service Manual

Page: 11 / 30

Samsung Electronics 10
Feature Display
3. Set Up the Model Option
3-1 Setting Option Setup Method
Option No. : (SH12AWH)
Step 1 : Enter the Option Setup mode.
1 st Take out the batteries of remote control.
2 nd Press the temperature button simultaneously and
insert the battery again.
3 rd Make sure the remocon display shown as .
Step 2 : Enter the Option Setup mode and select your option according to the following procedure.
3
1,4 2,5
Setting Option SEG1.
Push the button to set the display panel to .
Every time you push the button, the display panel reads
. . .
repeatedly.
2
Setting Option SEG2.
Push the button to set the display panel to .
Every time you push the button, the display panel reads
. . .
repeatedly.
4
Setting Option SEG3.
Push the button to set the display panel to .
Every time you push the button, the display panel reads
. . .
repeatedly.
3
Change it into the set display of Option SEG3 and SEG4
with the button.
5
Setting Option SEG4.
Push the button to set the display panel to .
Every time you push the button, the display panel reads
. . .
repeatedly.
1
DB98_15924A(2)_1 04/3/8 11:29 AM Page 10