Samsung AQ09NSA, Service Manual

Page: 23 / 96

Samsung Electronics 3-7
3-3 Setting Option Setup Method
Option No. :
Step 1
:
Enter the Option Setup mode.
1st Take out the batteries of remote control.
2nd Press the temp. button simultaneously and
insert the battery again.
3rd Make sure the remote control display shown as .
Step 2
:
Enter the Option Setup mode and select your option according to the following procedure.
1
2
3
4
5
6
7
8
9
10
11
12
 Setting is not required if you must
a value which has a default.
1
The default value is .
Otherwise, push the button to .
Every time you push the button, the display panel reads or
repeatedly.
2
Push the button to set the display panel to .
Every time you push the button, the display panel reads
. . .
repeatedly.
3
Push the button to set the display panel to .
Every time you push the button, the display panel reads
. . .
repeatedly.
4
Push the button to set the display panel to .
Every time you push the button, the display panel reads
. . .
repeatedly.
5
Push the button to set the display panel to .
Every time you push the button, the display panel reads
. . .
repeatedly.
6
Push the button to set the display panel to .
Every time you push the button, the display panel reads
. . .
repeatedly.