E-
15
ENGLISH
Selecting Heat Mode
You can select Heat mode if you want to heat your room.
You can adjust the temperature and the fan speed when heating.
1
Press the
(On/Off) button.
Result
:
The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode you selected last.
The indoor unit beeps.
2
Press the
button on the remote control until
is displayed.
Result
:
The indoor unit beeps each time you press the
button.
The air conditioner runs in Heat mode.
Note
You can change modes at any time.
3
Press the
button to adjust the temperature until the required
temperature is displayed.
You can set the temperature between 16°C and 30°C.
Result
:
Each time you press the
button:
- The temperature adjusts by 1°C
- The indoor unit beeps
If the room temperature reaches 5°C higher than the set
temperature, the air conditioner stops heating, but the fan
continues to operate.
If the room temperature reaches 3°C lower than the set
temperature, the air conditioner starts heating again.
4
Press the
button to select the fan speed until the required setting is
displayed.
Automatic (rotated :
)
Low
Medium
High
Maximum
Result
:
Each time you press the
button, the indoor unit beeps.
For the first 3~5 minutes, the fan may not operate to prevent
cool air from flowing out of the indoor unit.
This helps to warm the air in your room sufficiently.
5
To control the airflow direction, refer to page 21.
FORTE_IB_E.indd 15
2007-2-16 14:58:52
