E-
18
Selecting Good Sleep Mode
Good Sleep mode helps users to fall asleep well after going to bed whether
being too hot to sleep or being awakened by coldness. The Good Sleep mode can
be selected only when the air conditioner is switched on in cool/heat mode.
1
Press the
(On/Off) button.
Result
:
The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode you selected last.
The indoor unit beeps.
2
Press the
button to select or mode.
Result
:
The indoor unit beeps each time you press the
button.
The air conditioner runs in cool or heat mode.
3
Press the
button.
- The remote control display shows you that this mode automatically stops
after 8-hour operation.
- In the case of adjusting time
Press the
button to adjust desired operation time from 30 minutes
to 12 hours.
Good Sleep mode will automatically stop after the set time.
Press the
button.
Result
:
In the case of adjusting the extra time for Good Sleep mode,you
should press the
button within 10 seconds.If you do not press
the
button within 10 seconds.Good Sleep mode will
automatically stop in 8-hour operation.
4
Press the
button to adjust the temperature until the desired
temperature is displayed.
You can set the temperature between 16°C and 30°C.
Result
:
Each time you press the
button;
- The temperature adjusts by 1°C
- The indoor unit beeps
Temperature changes in
mode
To prevent excessive cooling/heating during sleep, the
mode automatically modifies
the temperature setting in accordance with the time setting. Temperature and air current change
according to the three stages; Falling asleep, Sound sleep, and Waking up from
mode,
and then the air conditioner will automatically turn off when the set time has elapsed.
Three stage
prevents you from having difficulty sleeping on extremely hot/cold nights.
Falling asleep
: Eases you into sleep by dropping the temperature.
Sound sleep
: Relaxes your body and raises your temperature slightly.
Waking up from
mode
:
Allows you to wake up to comfortable crisp air making you feel refreshed and energized.
• Set the Off timer in
mode for more than 5 hours. Sleep may be disturbed if the
mode is set for too short or too long a time because the temperature changes are
set to an 8-hour cycle.
• If the
mode is set for less than 4 hours, the operation will stop at the set time.
If the
mode is set for over 5 hours, the last hour will run in Waking Up stage before
shutting off.
• Recommended set temperature is between 25˚C~27˚C for cooling and 21˚C~23˚C for
heating.
Cool mode
Heat mode
FORTE_Inv_IB_E.indd 18
2007-10-18 15:28:40
Get user manuals: