29
EN
G
LIS
H
• Install the insulation not to be get wider and use adhesive on the connection part of it to prevent moisture
entering .
• Bind the refrigerant pipe with insulation tape if it is exposed to outside sunlight . (When binding the pipe with
finishing tape, be careful not to reduce the thickness of the insulation .)
• Install the refrigerant pipe respecting that the insulation does not get thinner on the bent part or hanger of pipe .
• When the thickness of insulation is reduced, supplement the reduced thickness with additional insulation .
Insulation for
refrigerant pipe
a x 3
Hanger
Additional
insulation
a
CAUTION
Insulating the header joint
X
X
Fasten the header joint using a cable tie and cover the connected part .
X
X
Insulate the header joint and the brazing part and wrap the connected part with an
adhesive insulation tape to prevent dew formation .
Insulation
Adhesive insulation
tape
Insulation for the
refrigerant pipe
Insulation for the
header joint
Insulation after brazing a stopper
Adhesive insulation tape
X
X
Fix the header joint with a hanger after insulating it .
AM0@@FXMDCH_IM_EN_03408A(1).indd 29
2013-03-04 오후 4:28:24
