manualshive.com logo in svg

Samsung AM017HN1DEH/EU, Service Manual

Share
Download
Samsung AM017HN1DEH/EU Service Manual Download Page 190

Disassembly and Reassembly

Samsung Electronics

193

No

Parts

Procedure

Remark

4)   Separate the 2 thermal sensors attached   

to Ass'y Evap.

5)   Unscrew 2 screws from the Support        

Evap L.

6)   Unscrew 2 screws from the Support        

Evap R.

7)   Pull the Ass'y Evap to the direction             

indicated by the arrow to separate it from 
the fixed part.

8)   Hold the end part of the Ass'y Evap and 

pull to the direction indicated by the arrow 
to separate it from the product. 

Summary of Contents for AM017HN1DEH/EU









































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands