manualshive.com logo in svg

Samsung AM FNHDEH Series, Installation Manual, Page: 42 / 44

Share
Download
Samsung AM FNHDEH Series Installation Manual Download Page 42

42

Instruction for packing and unpacking the unit

 

X

Packing the unit as below procedure.

1. 

Put the indoor unit onto the packing case.

2. 

Assemble cushion-both side of indoor unit. (Left and Right)

3. 

Seal the packing case.

 

X

Unpacking the unit as below procedure.

1. 

Open the packing case.

2. 

Take out the both side of cushion(Left and Right).

3. 

Move the set from the packing case.

Technical specifications

MODEL

AM220FNHDEH/TK

AM280FNHDEH/TK

CLIMATES CLASS

T1

T3

T1

T3

RATED VOLTAGE & FREQUENCY

220 - 240 V~ 50 Hz

RATED CURRENT

COOLING

3.80 A

3.80 A

5.90 A

5.90 A

HEATING(H1)

3.80 A

5.90 A

RATED POWER INPUT

COOLING

530 W

530 W

790 W

790 W

HEATING(H1)

530 W

790 W

EER

COOLING

-

-

-

-

HEATING(H1)

-

-

NET WEIGHT

89 kg

89 kg

DIMENSIONS OF THE UNIT [WxHxD]

1240 x 470 x 1040 mm

COUNTRY OF ORIGIN

MADE IN KOREA

NASA_Big Duct_AM@@@FNHDEH@_IM_03864A-05_EN.indd   42

2016-04-01   오후 5:29:52

Summary of Contents for AM FNHDEH Series













































Reviews:

No comments