background image

Cleaning Your Air Conditioner

(

✴✴✴✴

F1

✴✴✴

models)

If you...

Then...

Will not be using the 

◆ 

Set the fan going for three to four hours

air conditioner for a  

to dry the inside of the air conditioner

long period of time

thoroughly.

◆ 

Switch the air conditioner off and

unplug it from the wall socket.

◆ 

Clean the filter and outer surfaces.

Have not used the air

Set the fan going for three to four hours  

conditioner for a long

to dry the inside of the air conditioner 

period of time

thoroughly.

Hold the air filter handle, slightly pull it to the left side and open the front grille.

1

Pull the air filter to the right side.

2

Remove all dust on the air filter with a vacuum cleaner or brush.

3

When you have finished, insert the air filter back into its original position.

4

Wipe the surface of the unit with a neutral detergent and then wipe it again
with dry cloth.
(Be sure not to use benzene, solvent or other chemical products.)

5

The removal of the front grille makes it easier to clean the air
conditioner. Open the grille as much as possible.

Be sure to clean the air filter periodically two weeks to maintain the 
air conditioner in the best condition for a long period of time.

When cleaning the air conditioner, turn it off and pull out
the power plug.

E-

11

Front grille

Grille groove

Body guide

Removal and Reassembly of the Front Grille

Grasp the lower part of the front
grille and the air filter handle, then
open the grille. (The open angle
of front grille has not to be
exceeded 90 degree)

1

Push the front grille on the left and
remove it from the front panel.

2

Reassembling of front grille
should be done in reverse
order of disassembly.

3

C

C

C

C

A

A

A

A

U

U

U

U

T

T

T

T

II

II

O

O

O

O

N

N

N

N

Summary of Contents for AHT18F1HEB/XSG



















Reviews: