5
B. Connecting to a TV using the Video Jack (Video)
1. Using Video/Audio cables, connect the
VIDEO (yellow)/AUDIO (red and white) OUT
jacks on
the rear of the DVD player to the
VIDEO (yellow)/AUDIO (red and white) IN
jacks of your TV.
2. Turn on the DVD player and TV.
3. Press the input selector button on your TV remote control until the Video signal from the DVD
player appears on the TV screen.
Notes
- Noise may be generated if the audio cable is placed too close to the power cable.
- If you want to connect to an Amplifier, please refer to the Amplifier connection section below.
- The number and position of the jacks on your TV may vary depending on your TV set. Please
refer to the user’s manual of your TV.
- If there is one audio input terminal on the TV, connect it to the [AUDIO OUT] [left] (white) jack of
the DVD player.
- If you press the VIDEO SEL. button when the DVD Player is in stop mode or no disc is inserted,
the Video Output mode changes in the following sequence :
(I-SCAN
➝
P-SCAN) (Interlaced
➝
Progressive).
A. Connections to a TV using the Component Jacks (Interlace/Progressive)
- Connecting through the Component jacks lets you view video at the 480p (Progressive Scan)
resolution.
- What is “Progressive Scan”?
Progressive scan has twice as many scanning lines per frame as interlaced (480i) output and
provides better and clearer picture quality.
1.Using Component video cables (not included), connect the
COMPONENT VIDEO OUT (PR, PB
and Y)
jacks on the rear of the DVD player to the
COMPONENT IN (PR, PB and Y)
jacks of
your TV.
2. Using the audio cables, connect the
AUDIO (red and white) OUT
Jacks on the rear of the DVD
player to the
AUDIO (red and white) IN
Jacks of TV. Turn on the DVD player and TV.
3. Set the Video Output to
I-SCAN/P-SCAN
in the Display Setup menu. You can also use the
VIDEO SEL.
button to change the Video Output mode.
4. Press the input selector button on your TV remote control until the Component signal from the
DVD player appears on the TV screen.
C. Connection to an Audio System (2 Channel Amplifier, Dolby
Digital,MPEG2 or DTS Amplifier)
1. Using the audio cables, connect the
AUDIO (red and white) OUT
Jacks on the rear of the
DVD player to the
AUDIO (red and white) IN
Jacks of the Amplifier. If using a coaxial cable,
connect the
DIGITAL AUDIO OUT (COAXIAL)
jacks on the rear of the DVD player to the
DIGITAL AUDIO IN (COAXIAL)
Jack of the Amplifier.
2. Using the video signal cable(s), connect the
VIDEO
or
COMPONENT
Jacks on the rear of
the DVD player to the
VIDEO
or
COMPONENT
Jacks of your TV.
3. Turn on the DVD player, TV, and Amplifier.
4. Press the input select button of the Amplifier to select the audio input your DVD player is
connected to in order to hear sound. Refer to your Amplifier’s user manual to set the Amplifier’s
audio input.
RED
A
B
C
2-Channel stereo ampilfier,
Dolby Digital or
DTS amplifier
Coaxial Cable
Component Cable
Video Cable
Audio Cable
WHITE
RED
RED
WHITE
YELLOW
YELLOW
RED
BLUE GREEN
BLUE
GREEN
RED
WHITE
RED WHITE
Basic functions
Playing a Disc
Before Play
- Using your TV’s remote control, turn on your TV and set it to the Video Input your DVD player is
connected to.
- If you connected the DVD player to an external Audio System, turn on your Audio System and
set it to the correct Audio Input.
After plugging in the player, the first time you press the DVD
POWER button, the screen to the right appears: If you want to
select a language, press the
π
/
†
button, and then press the
ENTER button. (This screen will only appear when you plug
in the player for the first time.) If the language for the startup
screen is not set, the settings may change whenever you turn
the power on or off. Therefore, make sure that you select the
language you want to use.
Once you select a menu language, you can change it by pressing
the ( ) button on the front panel of the unit for more than 5 seconds with no disc in the unit. Then
the SELECT MENU LANGUAGE window appears again where you can reset to your preferred
language.
Select Menu Language
English
Français
Deutsch
Español
Italiano
Nederlands
RED
