30
Installation Procedure
Ins
tallation Pr
oc
edur
e
English
Steps
Remote control display
b
Set the SEG22 value by pressing the
(High Fan) button repeatedly until the
value you want to set appears on the remote control display.
When you press the
(Low Fan) or
(High Fan) button, values appear in the
following order:
SEG22
18
Press the
(Mode) button.
Heat
and
Off
appear on the remote control display.
19
Set the SEG23 and SEG24 values:
a
Set the SEG23 value by pressing the
(Low Fan) button repeatedly until the
value you want to set appears on the remote control display.
SEG23
b
Set the SEG24 value by pressing the
(High Fan) button repeatedly until the
value you want to set appears on the remote control display.
When you press the
(Low Fan) or
(High Fan) button, values appear in the
following order:
SEG24
3
Check whether the option values that you have set are
correct by pressing the
(Mode) button repeatedly
[SEG2, SEG3]
[SEG11, SEG12]
[SEG21, SEG22]
[SEG4, SEG5]
[SEG14, SEG15]
[SEG23, SEG24]
[SEG6, SEG8]
[SEG16, SEG17]
[SEG9, SEG10]
[SEG18, SEG20]
4
Save the option values into the indoor unit:
Point the remote control to the remote control sensor
on the indoor unit and then press the
(Power)
button on the remote control twice. Make sure that
this command is received by the indoor unit. When it
is successfully received, you can hear a short sound
from the indoor unit. If the command is not received,
press the
(Power) button again.
5
Check whether the air conditioner operates in
accordance with the option values you have set:
a
Reset the indoor or outdoor unit.
ŷ
Indoor unit : Press the
(Set) and
(Low Fan) buttons on the remote control
simultaneously for 4 seconds.
ŷ
Outdoor unit : Press the K3 button.
b
Remove the batteries from the remote control,
insert them again, and then press the
(Power)
button on the remote control.
