4-1
▶
Indoor address set-up and installation options, set the remote control option..
ADDRESS setting and indoor settings option haohni setting is not possible at the same time, set each of the options.
If necessary, set up the indoor address setting installation options, you must enter twice.
4-1-1. The procedure of setting option
▶
MR-EC00 and MR-EH00 remote controls
CAUTION
SEG1
SEG2
SEG3
SEG4
SEG5
SEG6
SEG7
SEG8
SEG9
SEG10
SEG11
SEG12
0
X
X
X
X
X
1
X
X
X
X
X
SEG13
SEG14
SEG15
SEG16
SEG17
SEG18
SEG19
SEG20
SEG21
SEG22
SEG23
SEG24
2
X
X
X
X
X
3
X
X
X
X
X
On (SEG1~12)
Off (SEG13~24)
High Temp button
High Fan button
Mode button
Low Temp button
Low Fan button
Entering the
mode for setting
the options
Setting the
option values
t5IFUPUBMOVNCFSPGBWBJMBCMFPQUJPOTBSF4&(UP4&(
t#FDBVTF4&(4&(4&(BOE4&(BSFUIFQBHFPQUJPOTVTFECZUIFQSFWJPVTSFNPUFDPOUSPMNPEFMTUIFNPEFTUP
set values for these options are skipped automatically.
t4FUBEJHJUWBMVFGPSFBDIPQUJPOQBJSJOUIFGPMMPXJOHPSEFS4&(BOE4&(
ĺ
SEG4 and SEG5
ĺ
SEG6 and SEG8
ĺ
SEG9 and SEG10
ĺ
SEG11 andSEG12
ĺ
SEG14 and SEG15
ĺ
SEG16 and SEG17
ĺ
SEG18 and
SEG20
ĺ
SEG21 and SEG22
ĺ
SEG23 and SEG24
4. Troubleshooting
4-1 Setting an indoor unit address and installation option
1.Enter the mode for setting the options :
a. R1emove the batteries from the remote control,and then insert them again.
b. While holding down the
(High Temp) and
(Low Temp) buttons simultaneously, insert thebatteries into the remote control.
c. Make sure that you are entered to the mode forsetting the options:batteries into the remote control.
2
. Set the option values.
Step 1
Enter the mode for setting the options
