24
Installation Procedure
Ins
tallation Pr
oc
edur
e
English
Steps
Remote control display
17
Set the SEG21 and SEG22 values:
a
Set the SEG21 value by pressing the
(Low Fan) button repeatedly until the
value you want to set appears on the remote control display.
SEG21
b
Set the SEG22 value by pressing the
(High Fan) button repeatedly until the
value you want to set appears on the remote control display.
When you press the
(Low Fan) or
(High Fan) button, values appear in the
following order:
SEG22
18
Press the
(Mode) button.
Heat
and
Off
appear on the remote control display.
19
Set the SEG23 and SEG24 values:
a
Set the SEG23 value by pressing the
(Low Fan) button repeatedly until the
value you want to set appears on the remote control display.
SEG23
b
Set the SEG24 value by pressing the
(High Fan) button repeatedly until the
value you want to set appears on the remote control display.
When you press the
(Low Fan) or
(High Fan) button, values appear in the
following order:
SEG24
3
Check whether the option values that you have set are correct by pressing the
(Mode) button repeatedly
[SEG21, SEG22]
[SEG23, SEG24]
4
4
[SEG2, SEG3]
[SEG4, SEG5]
[SEG6, SEG8]
[SEG9, SEG10]
0
0
[SEG11, SEG12]
[SEG14, SEG15]
[SEG16, SEG17]
7
7
[SEG18, SEG20]
0
0
4
Save the option values into the indoor unit:
Point the remote control to the remote control sensor on the indoor unit and then press the
(Power) button
on the remote control twice. Make sure that this command is received by the indoor unit. When it is successfully
received, you can hear a short sound from the indoor unit. If the command is not received, press the
(Power)
button again.
jhj|GX[ l|ptlUGGGY[
YWX]TXXTWYGGG㝘䟸GZaY[a\_
Summary of Contents for AC052MN4DKH
Page 32: ......
