
30
Installation Procedure
English
Installation Pr
oc
edur
e
Steps
Remote control display
18
Press the
(Mode) button.
Heat
and
Off
appear on the remote control display.
19
Set the SEG23 and SEG24 values:
a
Set the SEG23 value by rotating the Wheel
counterclockwise until the value you want to set appears
on the remote control display.
SEG23
b
Set the SEG24 value by rotating the Wheel clockwise
until the value you want to set appears on the remote
control display.
SEG24
When you rotate the Wheel, values appear in the following order:
3
Check whether the option values that you have set are
correct by pressing the
(Mode) button repeatedly.
[SEG2, SEG3]
[SEG11, SEG12]
[SEG21, SEG22]
[SEG4, SEG5]
[SEG14, SEG15]
[SEG23, SEG24]
[SEG6, SEG8]
[SEG16, SEG17]
[SEG9, SEG10]
[SEG18, SEG20]
4
Save the option values into the indoor unit:
Point the remote control to the remote control sensor
on the indoor unit and then press the
(Power)
button on the remote control twice. Make sure that
this command is received by the indoor unit. When it is
successfully received, you can hear a short sound from
the indoor unit. If the command is not received, press
the
(Power) button again.
5
Check whether the air conditioner operates in
accordance with the option values you have set:
a
Reset the indoor unit by disconnecting and then
reconnecting the power cable of the indoor unit or
by pressing the RESET button on the outdoor unit.
b
Remove the batteries from the remote control,
insert them again, and then press the
(Power)
button on the remote control.
MR-EH00U and AR-EH**U remote controls
Entering the mode for
setting the options
Setting the option
values
Mode button
High Fan button
Low Fan button
High Temp button
Low Temp button
NOTE
• The remote control display and buttons may vary
depending on the model.
1
Enter the mode for setting the options:
a
Remove the batteries from the remote control,
and then insert them again.
b
While holding down the
(High Temp) and
(Low Temp) buttons simultaneously, insert the
batteries into the remote control.
ki]_TXXY^ZhTWWptjhjG|GZ]WhhluUGGGZW
YWYXTW`TW_GGG㝘㤸G`aW]aY_
Summary of Contents for AC BN6DCH Series
Page 40: ......