
90
䢇
User ID
: enter the User ID required to connect to the network.
䢇
Password
: enter the user password required to connect to the network.
䢇
Protocol
: set the connection protocol used by the WAP browser: WAP, HTTP, or
Other.
䢇
Home URL
: enter the URL address of the page to be used as your homepage.
䢇
Gateway address
: (wap1.x only) enter the gateway address of the proxy server.
䢇
Proxy address
: (wap2.x and Cingualr MMS) set the proxy server address and
port.
䢇
Port
: enter the connection port.
䢇
Linger Time (Sec.)
: set a time period (in seconds) after which the network is
disconnected if there has been no new data traffic in that time.
䢇
Advanced Settings
: allows you to configure some of the IP-specific
information: Static IP, Static DNS, Server information, and Traffic Class.
䢇
Static IP
: specify if you want to manually enter an IP address. If you want the
IP address to be automatically assigned by the server, remove the check mark.
䢇
Local phone IP
: enter the IP address obtained from the network operator, if
you checked the Static IP option.
䢇
Static DNS
: specify if you want to manually enter the Domain Name Server
(DNS) address. If you want the address to be automatically assigned by the
server, remove the check mark.
䢇
Server 1/Server 2
: enter the Domain Name Server (DNS) addresses.
䢇
Traffic class
: select the traffic class.
Note:
The WAP settings may vary depending on the service provider.
Configuring your Phone’s USB Connection
Your phone can connect to a PC via the included USB cable.The phone can be
configured to open launch a default application when an active USB connection is
detected.
1.
Use the USB adapter cable to connect the handset to the target PC. When
an active connection has been established, a USB icon (
) appears on
the phone.
2.
When the Idle screen displays, press the
Menu
soft key.
3.
Select
Settings
and press the
Select
soft key or the
key.