Model
Connecting the Monitor
1.
Connect a power line to a direct current power supply and then plug it into the relevant power
port.
2.
Use a connection appropriate for your computer.
2-1.
Using the D-Sub (analog) connector on the video card.
Connect the
DVI
terminal of your monitor to the D-Sub terminal of your computer using
a DVI/D-Sub cable.
2-2.
Connected to a Macintosh.
Connect the monitor to the Macintosh computer using the 'DVI to D-SUB' connection
cable.
Turn on your computer and monitor. If your monitor displays an image, installation is
complete.
If you properly connect your monitor using the DVI connector but get a blank screen, check to
see if the monitor status is set to analog. In this case, turn the Power off and on so that your
monitor rechecks the input signals.
SyncMaster 971P
Summary of Contents for 971P - SyncMaster - 19" LCD Monitor
Page 1: ...SyncMaster 971P...
