background image

Safety Instructions

Notational

 Note

These safety instructions must be followed to ensure your safety and prevent property damage.

Make sure to read the instructions carefully and use the product in the correct manner.

 Warning / Caution

Otherwise, it may result in death or personal injury.

Otherwise, it may result in personal injury or property damage.

 Notational Conventions

Prohibited

Important to read and under-
stand at all times

Do not disassemble

Disconnect the plug from the
outlet

Do not touch

Ground to prevent an electric
shock

Power

When not used for extended period of time, set your computer to DPM.

If using screen saver, set it to active screen mode.

The images here are for reference only, and are not applicable in all cases (or
countries).

Shortcut to Anti-Afterimage Instructions

 Do not use a damaged power cord or plug or a damaged or loose power

outlet.

Otherwise, this may result in electric shock or fire.

 Do not touch the power plug with wet hands when removing or plug-

ging the plug into the outlet.

Otherwise, this may result in electric shock.

 Make sure to connect the power cord to a grounded power outlet.

Otherwise, it may result in electric shock or personal injury.

1

Summary of Contents for 932BW - SyncMaster - 19" LCD Monitor
































































Reviews: