manualshive.com logo in svg

Samsung 932B - SyncMaster - 19" LCD Monitor, Service Manual

Share
Download
Samsung 932B - SyncMaster - 19

11 Disassembly and Reassembly

11-1

11 Disassembly and Reassembly

This section of the service manual describes the disassembly and reassembly procedures for the LS17PEA/LS19PEB
TFT-LCD monitors.

WARNING: This monitor contains electrostatically sensitive devices. Use caution when handling

these components.

11-1 Disassembly

Cautions:

1. Disassemble stand on a flat desk.

2. Disconnect the monitor from the power source before disassembly.

Description

Picture Description

1. Place a soft cloth on the desk and place the 

monitor on the cloth upside down. Remove the 

stand in the direction of the arrow.

2. Turn the monitor so the front section is facing 

upwards. Remove the marked parts from the 

front cover, as shown in the figure below. 

3. Remove the marked part from the top edge of 

the front cover, as shown in the figure below.

Summary of Contents for 932B - SyncMaster - 19" LCD Monitor
























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands