63
ENGLISH
Power Sources (United Kingdom Only)
The mains lead on the power adapter is supplied with a molded plug incorporating a fuse.
The value of the fuse is indicated on the pin face of the plug and, if it requires replacing, a fuse
approved to BS1362 of the same rating must be used.
Never use the plug with the fuse cover omitted if the cover is detachable.
If a replacement fuse cover is required, it must be of the same colour as the pin face of the plug.
Replacement covers are available from your dealer.
If the fitted plug is not suitable for the power points in your house or the cable is not long enough to
reach a power point, you should obtain a suitable safety approved extension lead or consult your
dealer for assistance.
However, if there is no alternative to cutting off the plug, remove the fuse and then safely dispose of
the plug. Do NOT connect the plug to a mains socket as there is a risk of shock hazard from the
bared flexible cord.
IMPORTANT
The wires in the mains lead are coloured in accordance with the following code:
BLUE = NEUTRAL
BROWN = LIVE
As these colours may not correspond to the coloured markings identifying the terminals in your plug,
proceed as follows:
The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured
BLUE or BLACK.
The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured
BROWN or RED.
WARNING
Do not connect either wire to the earth terminal marked with the letter E or
the earth symbol, , or coloured GREEN or GREEN and YELLOW.
NOTE
This page is applicable to Great Britain only.
