Samsung 6B ENHANCED User Manual Download Page 37

Page: 37 / 68

DCS Gateway

Keyset User Guide

— 30 —

Last Number Redial

To redial the last telephone number you dialled:

•

Press the

REDIAL

key, or scroll to the CALL menu and se-

lect LNR, or dial

*90

1. The Redial

feature code is applicable to the LNR menu on

the LCD panel of the keyset.

2. Redial applies to all calls, including internal calls, unless

restricted to external calls by the System Administrator.

Save Number With Redial

To save the number you just dialled for later use:

•

Press the

SAVE/REPEAT

key, or press the

TRSF

key and

dial

*95

, before hanging up.

To redial this saved number at any time:

•

Press the

SAVE/REPEAT

key or dial

*95

The SAVE/REPEAT feature code is applicable to the SNR
menu on the LCD panel of the keyset.

2. The saved telephone number is stored in memory until you

save another number.

3. This feature is only available for outgoing external calls.

Automatic Redial/Retry

When you are making an outside call and you receive busy
tone, the system can automatically redial the number for you. It
will automatically redial at a pre-programmed interval for up

Summary of Contents for 6B ENHANCED





































































Search results

Summary of Contents for 6B ENHANCED

Reviews:

Related manuals for 6B ENHANCED

Brands by name

Popular brands

Samsung 6B ENHANCED, User Manual

Search results

Summary of Contents for 6B ENHANCED

Reviews:

Related manuals for 6B ENHANCED

Brands by name

Popular brands