42
English
Remote control code is set to 0. If you want to
change Remote control code, enter the digit you
want to change.
¦
Multi Code Remocon
Multi Code Remocon is a special transmitter which is designed to control each TV with one remote.
This is useful where there is more than one TV in a location, such as in a hospital The set ID Set ID number is displayed in
source osd. It is possible to support up to 9 different remote key transmissions for multiple codes.
Each TV has an initial code of "0".
– The ID code can be set and reset in Analog TV mode or PC mode. (not available in TTX channel or DTV channel)
– ID code can be from 0 to 9.
– Press the
RETURN
+
MUTE
over 7 seconds and then select the number button to set the code.
– Set ID OSD will be displayed in central position.
– The following words appear: “Remote control code is set to x. If you want to change Remote control code. Enter the
digit you want to change.” X is the digit number This OSD displays until Exit is pressed.
– For example, TV and Remote will be set to ID code #1 if the user presses #1.
– The following words appear: “Remote control code is changed to 1” Then TV can be controlled only by the remote with
the same ID code as the TV.
– If ID code does not match between remote and TV, TV unit do not give ANY respond.
– To reset the ID code, press the Yellow key for over 3 seconds. the ID code for both the TV and Remote are reset to “0”.
“Remote control code is set to 0.” appears.
