Samsung 670, Installation Manual

Page: 42 / 74

42
English
Setting the Hotel Option Data
To enter: Press the MUTE → 1 → 1 → 9 → ENTER
E
buttons in that order. (From Hospitality mode, Standalone mode is set.)
To exit from this menu: power off and turn on again.
No
Hotel TV Function
Description
Category Item Initial value
1 Hospitality Mode Hospitality Mode Standalone
y
Select Hospitality Mode.
y
Interactive mode: TV works with an SI STB or SBB.
y
Standalone mode: TV works alone, without an SI STB or SBB.
2 SI Vendor SI Vendor OFF
y
Interactive mode: Samsung / 26M / Locatel / VDA / VDA-S / Acentic
/ Sustinere / Quadriga / ETV / Ibahn / Magilink / Otrum / Siemens /
Amino / MDC / Enseo
y
Standalone mode: OFF / Movielink / Swisscom / Smoovie / SSCP
3 Power On
Power On Channel Last Saved
Sets the default values that will be applied when the TV is turned on.
y
User Defined: Lets you set Power On Channel and Channel Type
manually. See Power On Channel Number and Channel Type below.
y
Last Saved: If you select this item, when the TV is turned on, it
displays the channel it was displaying when it was turned off.
Power On Channel Num … When the TV is turned on, it automatically switches to this channel.
Power On Channel Type …
y
Select channel band: ATV (analog air band), DTV (digital air band),
CATV(analog cable band) or CDTV (digital cable band)
Power On Volume Last Saved
y
User Defined: Lets you set the Power On Volume manually. See
Power On Volume Number below.
y
Last Saved: When the TV is turned on, it returns to the volume that
was set when the power was turned off.
Power On Volume Num … The TV turns on with this Volume Level.
Min Volume 0
The minimum Volume Level the user can set in Stand Alone
Hospitality mode.
Max Volume 100 The maximum Volume Level the user can set.
Power On Source TV Select the input source the TV displays when it is turned on.
Power On Option Last Option
Determines the TV's state when power returns after a power failure or
after you have unplugged the TV and then plugged it in again.
y
Last Option: Returns to its last Power state. If it was in Stand-by, it
returns to Stand-by. If it was on, it turns on.
y
Power On: When the power returns, the TV turns on.
y
Standby: When the power returns, the TV enters the Standby mode.
4 Channel
Channel Setup …
Gives you direct, immediate access to some of the Channel menu
functions on the user Channel menu such as Auto Tuning, Manual
Tuning, Antenna setting, etc.
Channel Editor …
The Channel Editor lets you edit the channels stored in the TV's
memory. Using Channel Editor you can:
y
Change the channel numbers and names, and sort the channels in
your desired channel number order.
y
Apply video mute to channels you select. Video mute blanks out the
video from a channel and outputs only the sound while displaying
a speaker icon on the screen. The Channel Editor also lets you view
information about each channel easily, without having to display
each channel directly.