࡙
If any unexpected messages appear on your TV screen
requesting permission to link a device or enable a remote
session, do NOT accept.
࡙
Do not visit suspicious websites and do not install any
suspicious programs. We recommend that users install
only those authorized apps provided by Samsung through
Samsung Smart Hub.
01 Connecting the TV to
the One Connect Box
(One Connect Box Supported Model only)
For more information about how to connect via the One
Connect Box, refer to Unpacking and Installation Guide.
࡙
Do not use the One Connect Box in the
upside-down or upright position.
࡙
Take care not to subject the cable to any of
the actions below. The One Connect Cable
contains a power circuit.
Bending
Twisting
Pulling
Pressing
on
Electric
shock
CLASS 1 LASER PRODUCT (The Frame Series only)
࡙
Caution - Invisible laser radiation when open. Do not stare
into beam.
– Do not bend the One Connect Cable excessively. Do not
cut the cable.
– Do not place heavy objects on the cable.
– Do not disassemble either of the cable connectors.
࡙
Caution - Use of controls, adjustments, or the
performance of procedures other than those specified
herein may result in hazardous radiation exposure.
Using the One Connect cable holder
(QN8**D, QN9**D, S95D Series only)
You can use the One Connect cable holder to tidy up the
cables while installing the wall mount.
02 Initial Setup
When you turn on your TV for the first time, it immediately
starts the Initial Setup. Follow the instructions displayed on
the screen and configure the TV's basic settings to suit your
viewing environment.
࡙
You will need a Samsung Account to access our network-
based smart services. If you choose not to log in, you
will only get a connection to terrestrial TV (applicable to
devices with tuners only) and external devices, e.g. via
HDMI.
࡙
When installing the 43LS03D model as a wall mount, it
can be installed vertically and used.
– Some features may not support portrait mode or full
screen.
– The initial setup is optimized for landscape mode.
Using the TV Controller
You can turn on the TV with the
TV Controller
button at
the bottom of the TV, and then use the
Control menu
. The
Control menu
appears when the
TV Controller
button is
pressed while the TV is On.
࡙
The position and shape of the buttons at the bottom of
the TV may differ depending on the model.
࡙
The screen may dim if the protective film on the
SAMSUNG logo or the bottom of the TV is not removed. If
protective film is attached, remove the film.
Control menu
TV Controller
button /
Remote control sensor
/
Microphone switch
/ *
Motion Sensor
TV Controller
button /
Remote control sensor
Microphone switch
࡙
*In
Art
mode, the Remote control sensor at the bottom of
the TV remains off.
*: The Frame Series only
࡙
If any unexpected messages appear on your TV screen
requesting permission to link a device or enable a remote
session, do NOT accept.
࡙
Do not visit suspicious websites and do not install any
suspicious programs. We recommend that users install
only those authorized apps provided by Samsung through
Samsung Smart Hub.
01 Connecting the TV to
the One Connect Box
(One Connect Box Supported Model only)
For more information about how to connect via the One
Connect Box, refer to Unpacking and Installation Guide.
࡙
Do not use the One Connect Box in the
upside-down or upright position.
࡙
Take care not to subject the cable to any of
the actions below. The One Connect Cable
contains a power circuit.
Bending
Twisting
Pulling
Pressing
on
Electric
shock
CLASS 1 LASER PRODUCT (The Frame Series only)
࡙
Caution - Invisible laser radiation when open. Do not stare
into beam.
– Do not bend the One Connect Cable excessively. Do not
cut the cable.
– Do not place heavy objects on the cable.
– Do not disassemble either of the cable connectors.
࡙
Caution - Use of controls, adjustments, or the
performance of procedures other than those specified
herein may result in hazardous radiation exposure.
Using the One Connect cable holder
(QN8**D, QN9**D, S95D Series only)
You can use the One Connect cable holder to tidy up the
cables while installing the wall mount.
02 Initial Setup
When you turn on your TV for the first time, it immediately
starts the Initial Setup. Follow the instructions displayed on
the screen and configure the TV's basic settings to suit your
viewing environment.
࡙
You will need a Samsung Account to access our network-
based smart services. If you choose not to log in, you
will only get a connection to terrestrial TV (applicable to
devices with tuners only) and external devices, e.g. via
HDMI.
࡙
When installing the 43LS03D model as a wall mount, it
can be installed vertically and used.
– Some features may not support portrait mode or full
screen.
– The initial setup is optimized for landscape mode.
Using the TV Controller
You can turn on the TV with the
TV Controller
button at
the bottom of the TV, and then use the
Control menu
. The
Control menu
appears when the
TV Controller
button is
pressed while the TV is On.
࡙
The position and shape of the buttons at the bottom of
the TV may differ depending on the model.
࡙
The screen may dim if the protective film on the
SAMSUNG logo or the bottom of the TV is not removed. If
protective film is attached, remove the film.
Control menu
TV Controller
button /
Remote control sensor
/
Microphone switch
/ *
Motion Sensor
TV Controller
button /
Remote control sensor
Microphone switch
࡙
*In
Art
mode, the Remote control sensor at the bottom of
the TV remains off.
*: The Frame Series only
࡙
If any unexpected messages appear on your TV screen
requesting permission to link a device or enable a remote
session, do NOT accept.
࡙
Do not visit suspicious websites and do not install any
suspicious programs. We recommend that users install
only those authorized apps provided by Samsung through
Samsung Smart Hub.
01 Connecting the TV to
the One Connect Box
(One Connect Box Supported Model only)
For more information about how to connect via the One
Connect Box, refer to Unpacking and Installation Guide.
࡙
Do not use the One Connect Box in the
upside-down or upright position.
࡙
Take care not to subject the cable to any of
the actions below. The One Connect Cable
contains a power circuit.
Bending
Twisting
Pulling
Pressing
on
Electric
shock
CLASS 1 LASER PRODUCT (The Frame Series only)
࡙
Caution - Invisible laser radiation when open. Do not stare
into beam.
– Do not bend the One Connect Cable excessively. Do not
cut the cable.
– Do not place heavy objects on the cable.
– Do not disassemble either of the cable connectors.
࡙
Caution - Use of controls, adjustments, or the
performance of procedures other than those specified
herein may result in hazardous radiation exposure.
Using the One Connect cable holder
(QN8**D, QN9**D, S95D Series only)
You can use the One Connect cable holder to tidy up the
cables while installing the wall mount.
02 Initial Setup
When you turn on your TV for the first time, it immediately
starts the Initial Setup. Follow the instructions displayed on
the screen and configure the TV's basic settings to suit your
viewing environment.
࡙
You will need a Samsung Account to access our network-
based smart services. If you choose not to log in, you
will only get a connection to terrestrial TV (applicable to
devices with tuners only) and external devices, e.g. via
HDMI.
࡙
When installing the 43LS03D model as a wall mount, it
can be installed vertically and used.
– Some features may not support portrait mode or full
screen.
– The initial setup is optimized for landscape mode.
Using the TV Controller
You can turn on the TV with the
TV Controller
button at
the bottom of the TV, and then use the
Control menu
. The
Control menu
appears when the
TV Controller
button is
pressed while the TV is On.
࡙
The position and shape of the buttons at the bottom of
the TV may differ depending on the model.
࡙
The screen may dim if the protective film on the
SAMSUNG logo or the bottom of the TV is not removed. If
protective film is attached, remove the film.
Control menu
TV Controller
button /
Remote control sensor
/
Microphone switch
/ *
Motion Sensor
TV Controller
button /
Remote control sensor
Microphone switch
࡙
*In
Art
mode, the Remote control sensor at the bottom of
the TV remains off.
*: The Frame Series only
࡙
If any unexpected messages appear on your TV screen
requesting permission to link a device or enable a remote
session, do NOT accept.
࡙
Do not visit suspicious websites and do not install any
suspicious programs. We recommend that users install
only those authorized apps provided by Samsung through
Samsung Smart Hub.
01 Connecting the TV to
the One Connect Box
(One Connect Box Supported Model only)
For more information about how to connect via the One
Connect Box, refer to Unpacking and Installation Guide.
࡙
Do not use the One Connect Box in the
upside-down or upright position.
࡙
Take care not to subject the cable to any of
the actions below. The One Connect Cable
contains a power circuit.
Bending
Twisting
Pulling
Pressing
on
Electric
shock
CLASS 1 LASER PRODUCT (The Frame Series only)
࡙
Caution - Invisible laser radiation when open. Do not stare
into beam.
– Do not bend the One Connect Cable excessively. Do not
cut the cable.
– Do not place heavy objects on the cable.
– Do not disassemble either of the cable connectors.
࡙
Caution - Use of controls, adjustments, or the
performance of procedures other than those specified
herein may result in hazardous radiation exposure.
Using the One Connect cable holder
(QN8**D, QN9**D, S95D Series only)
You can use the One Connect cable holder to tidy up the
cables while installing the wall mount.
02 Initial Setup
When you turn on your TV for the first time, it immediately
starts the Initial Setup. Follow the instructions displayed on
the screen and configure the TV's basic settings to suit your
viewing environment.
࡙
You will need a Samsung Account to access our network-
based smart services. If you choose not to log in, you
will only get a connection to terrestrial TV (applicable to
devices with tuners only) and external devices, e.g. via
HDMI.
࡙
When installing the 43LS03D model as a wall mount, it
can be installed vertically and used.
– Some features may not support portrait mode or full
screen.
– The initial setup is optimized for landscape mode.
Using the TV Controller
You can turn on the TV with the
TV Controller
button at
the bottom of the TV, and then use the
Control menu
. The
Control menu
appears when the
TV Controller
button is
pressed while the TV is On.
࡙
The position and shape of the buttons at the bottom of
the TV may differ depending on the model.
࡙
The screen may dim if the protective film on the
SAMSUNG logo or the bottom of the TV is not removed. If
protective film is attached, remove the film.
Control menu
TV Controller
button /
Remote control sensor
/
Microphone switch
/ *
Motion Sensor
TV Controller
button /
Remote control sensor
Microphone switch
࡙
*In
Art
mode, the Remote control sensor at the bottom of
the TV remains off.
*: The Frame Series only
࡙
If any unexpected messages appear on your TV screen
requesting permission to link a device or enable a remote
session, do NOT accept.
࡙
Do not visit suspicious websites and do not install any
suspicious programs. We recommend that users install
only those authorized apps provided by Samsung through
Samsung Smart Hub.
01 Connecting the TV to
the One Connect Box
(One Connect Box Supported Model only)
For more information about how to connect via the One
Connect Box, refer to Unpacking and Installation Guide.
࡙
Do not use the One Connect Box in the
upside-down or upright position.
࡙
Take care not to subject the cable to any of
the actions below. The One Connect Cable
contains a power circuit.
Bending
Twisting
Pulling
Pressing
on
Electric
shock
CLASS 1 LASER PRODUCT (The Frame Series only)
࡙
Caution - Invisible laser radiation when open. Do not stare
into beam.
– Do not bend the One Connect Cable excessively. Do not
cut the cable.
– Do not place heavy objects on the cable.
– Do not disassemble either of the cable connectors.
࡙
Caution - Use of controls, adjustments, or the
performance of procedures other than those specified
herein may result in hazardous radiation exposure.
Using the One Connect cable holder
(QN8**D, QN9**D, S95D Series only)
You can use the One Connect cable holder to tidy up the
cables while installing the wall mount.
02 Initial Setup
When you turn on your TV for the first time, it immediately
starts the Initial Setup. Follow the instructions displayed on
the screen and configure the TV's basic settings to suit your
viewing environment.
࡙
You will need a Samsung Account to access our network-
based smart services. If you choose not to log in, you
will only get a connection to terrestrial TV (applicable to
devices with tuners only) and external devices, e.g. via
HDMI.
࡙
When installing the 43LS03D model as a wall mount, it
can be installed vertically and used.
– Some features may not support portrait mode or full
screen.
– The initial setup is optimized for landscape mode.
Using the TV Controller
You can turn on the TV with the
TV Controller
button at
the bottom of the TV, and then use the
Control menu
. The
Control menu
appears when the
TV Controller
button is
pressed while the TV is On.
࡙
The position and shape of the buttons at the bottom of
the TV may differ depending on the model.
࡙
The screen may dim if the protective film on the
SAMSUNG logo or the bottom of the TV is not removed. If
protective film is attached, remove the film.
Control menu
TV Controller
button /
Remote control sensor
/
Microphone switch
/ *
Motion Sensor
TV Controller
button /
Remote control sensor
Microphone switch
࡙
*In
Art
mode, the Remote control sensor at the bottom of
the TV remains off.
*: The Frame Series only
࡙
If any unexpected messages appear on your TV screen
requesting permission to link a device or enable a remote
session, do NOT accept.
࡙
Do not visit suspicious websites and do not install any
suspicious programs. We recommend that users install
only those authorized apps provided by Samsung through
Samsung Smart Hub.
01 Connecting the TV to
the One Connect Box
(One Connect Box Supported Model only)
For more information about how to connect via the One
Connect Box, refer to Unpacking and Installation Guide.
࡙
Do not use the One Connect Box in the
upside-down or upright position.
࡙
Take care not to subject the cable to any of
the actions below. The One Connect Cable
contains a power circuit.
Bending
Twisting
Pulling
Pressing
on
Electric
shock
CLASS 1 LASER PRODUCT (The Frame Series only)
࡙
Caution - Invisible laser radiation when open. Do not stare
into beam.
– Do not bend the One Connect Cable excessively. Do not
cut the cable.
– Do not place heavy objects on the cable.
– Do not disassemble either of the cable connectors.
࡙
Caution - Use of controls, adjustments, or the
performance of procedures other than those specified
herein may result in hazardous radiation exposure.
Using the One Connect cable holder
(QN8**D, QN9**D, S95D Series only)
You can use the One Connect cable holder to tidy up the
cables while installing the wall mount.
02 Initial Setup
When you turn on your TV for the first time, it immediately
starts the Initial Setup. Follow the instructions displayed on
the screen and configure the TV's basic settings to suit your
viewing environment.
࡙
You will need a Samsung Account to access our network-
based smart services. If you choose not to log in, you
will only get a connection to terrestrial TV (applicable to
devices with tuners only) and external devices, e.g. via
HDMI.
࡙
When installing the 43LS03D model as a wall mount, it
can be installed vertically and used.
– Some features may not support portrait mode or full
screen.
– The initial setup is optimized for landscape mode.
Using the TV Controller
You can turn on the TV with the
TV Controller
button at
the bottom of the TV, and then use the
Control menu
. The
Control menu
appears when the
TV Controller
button is
pressed while the TV is On.
࡙
The position and shape of the buttons at the bottom of
the TV may differ depending on the model.
࡙
The screen may dim if the protective film on the
SAMSUNG logo or the bottom of the TV is not removed. If
protective film is attached, remove the film.
Control menu
TV Controller
button /
Remote control sensor
/
Microphone switch
/ *
Motion Sensor
TV Controller
button /
Remote control sensor
Microphone switch
࡙
*In
Art
mode, the Remote control sensor at the bottom of
the TV remains off.
*: The Frame Series only
࡙
If any unexpected messages appear on your TV screen
requesting permission to link a device or enable a remote
session, do NOT accept.
࡙
Do not visit suspicious websites and do not install any
suspicious programs. We recommend that users install
only those authorized apps provided by Samsung through
Samsung Smart Hub.
01 Connecting the TV to
the One Connect Box
(One Connect Box Supported Model only)
For more information about how to connect via the One
Connect Box, refer to Unpacking and Installation Guide.
࡙
Do not use the One Connect Box in the
upside-down or upright position.
࡙
Take care not to subject the cable to any of
the actions below. The One Connect Cable
contains a power circuit.
Bending
Twisting
Pulling
Pressing
on
Electric
shock
CLASS 1 LASER PRODUCT (The Frame Series only)
࡙
Caution - Invisible laser radiation when open. Do not stare
into beam.
– Do not bend the One Connect Cable excessively. Do not
cut the cable.
– Do not place heavy objects on the cable.
– Do not disassemble either of the cable connectors.
࡙
Caution - Use of controls, adjustments, or the
performance of procedures other than those specified
herein may result in hazardous radiation exposure.
Using the One Connect cable holder
(QN8**D, QN9**D, S95D Series only)
You can use the One Connect cable holder to tidy up the
cables while installing the wall mount.
02 Initial Setup
When you turn on your TV for the first time, it immediately
starts the Initial Setup. Follow the instructions displayed on
the screen and configure the TV's basic settings to suit your
viewing environment.
࡙
You will need a Samsung Account to access our network-
based smart services. If you choose not to log in, you
will only get a connection to terrestrial TV (applicable to
devices with tuners only) and external devices, e.g. via
HDMI.
࡙
When installing the 43LS03D model as a wall mount, it
can be installed vertically and used.
– Some features may not support portrait mode or full
screen.
– The initial setup is optimized for landscape mode.
Using the TV Controller
You can turn on the TV with the
TV Controller
button at
the bottom of the TV, and then use the
Control menu
. The
Control menu
appears when the
TV Controller
button is
pressed while the TV is On.
࡙
The position and shape of the buttons at the bottom of
the TV may differ depending on the model.
࡙
The screen may dim if the protective film on the
SAMSUNG logo or the bottom of the TV is not removed. If
protective film is attached, remove the film.
Control menu
TV Controller
button /
Remote control sensor
/
Microphone switch
/ *
Motion Sensor
TV Controller
button /
Remote control sensor
Microphone switch
࡙
*In
Art
mode, the Remote control sensor at the bottom of
the TV remains off.
*: The Frame Series only
࡙
If any unexpected messages appear on your TV screen
requesting permission to link a device or enable a remote
session, do NOT accept.
࡙
Do not visit suspicious websites and do not install any
suspicious programs. We recommend that users install
only those authorized apps provided by Samsung through
Samsung Smart Hub.
01 Connecting the TV to
the One Connect Box
(One Connect Box Supported Model only)
For more information about how to connect via the One
Connect Box, refer to Unpacking and Installation Guide.
࡙
Do not use the One Connect Box in the
upside-down or upright position.
࡙
Take care not to subject the cable to any of
the actions below. The One Connect Cable
contains a power circuit.
Bending
Twisting
Pulling
Pressing
on
Electric
shock
CLASS 1 LASER PRODUCT (The Frame Series only)
࡙
Caution - Invisible laser radiation when open. Do not stare
into beam.
– Do not bend the One Connect Cable excessively. Do not
cut the cable.
– Do not place heavy objects on the cable.
– Do not disassemble either of the cable connectors.
࡙
Caution - Use of controls, adjustments, or the
performance of procedures other than those specified
herein may result in hazardous radiation exposure.
Using the One Connect cable holder
(QN8**D, QN9**D, S95D Series only)
You can use the One Connect cable holder to tidy up the
cables while installing the wall mount.
02 Initial Setup
When you turn on your TV for the first time, it immediately
starts the Initial Setup. Follow the instructions displayed on
the screen and configure the TV's basic settings to suit your
viewing environment.
࡙
You will need a Samsung Account to access our network-
based smart services. If you choose not to log in, you
will only get a connection to terrestrial TV (applicable to
devices with tuners only) and external devices, e.g. via
HDMI.
࡙
When installing the 43LS03D model as a wall mount, it
can be installed vertically and used.
– Some features may not support portrait mode or full
screen.
– The initial setup is optimized for landscape mode.
Using the TV Controller
You can turn on the TV with the
TV Controller
button at
the bottom of the TV, and then use the
Control menu
. The
Control menu
appears when the
TV Controller
button is
pressed while the TV is On.
࡙
The position and shape of the buttons at the bottom of
the TV may differ depending on the model.
࡙
The screen may dim if the protective film on the
SAMSUNG logo or the bottom of the TV is not removed. If
protective film is attached, remove the film.
Control menu
TV Controller
button /
Remote control sensor
/
Microphone switch
/ *
Motion Sensor
TV Controller
button /
Remote control sensor
Microphone switch
࡙
*In
Art
mode, the Remote control sensor at the bottom of
the TV remains off.
*: The Frame Series only
࡙
If any unexpected messages appear on your TV screen
requesting permission to link a device or enable a remote
session, do NOT accept.
࡙
Do not visit suspicious websites and do not install any
suspicious programs. We recommend that users install
only those authorized apps provided by Samsung through
Samsung Smart Hub.
01 Connecting the TV to
the One Connect Box
(One Connect Box Supported Model only)
For more information about how to connect via the One
Connect Box, refer to Unpacking and Installation Guide.
࡙
Do not use the One Connect Box in the
upside-down or upright position.
࡙
Take care not to subject the cable to any of
the actions below. The One Connect Cable
contains a power circuit.
Bending
Twisting
Pulling
Pressing
on
Electric
shock
CLASS 1 LASER PRODUCT (The Frame Series only)
࡙
Caution - Invisible laser radiation when open. Do not stare
into beam.
– Do not bend the One Connect Cable excessively. Do not
cut the cable.
– Do not place heavy objects on the cable.
– Do not disassemble either of the cable connectors.
࡙
Caution - Use of controls, adjustments, or the
performance of procedures other than those specified
herein may result in hazardous radiation exposure.
Using the One Connect cable holder
(QN8**D, QN9**D, S95D Series only)
You can use the One Connect cable holder to tidy up the
cables while installing the wall mount.
02 Initial Setup
When you turn on your TV for the first time, it immediately
starts the Initial Setup. Follow the instructions displayed on
the screen and configure the TV's basic settings to suit your
viewing environment.
࡙
You will need a Samsung Account to access our network-
based smart services. If you choose not to log in, you
will only get a connection to terrestrial TV (applicable to
devices with tuners only) and external devices, e.g. via
HDMI.
࡙
When installing the 43LS03D model as a wall mount, it
can be installed vertically and used.
– Some features may not support portrait mode or full
screen.
– The initial setup is optimized for landscape mode.
Using the TV Controller
You can turn on the TV with the
TV Controller
button at
the bottom of the TV, and then use the
Control menu
. The
Control menu
appears when the
TV Controller
button is
pressed while the TV is On.
࡙
The position and shape of the buttons at the bottom of
the TV may differ depending on the model.
࡙
The screen may dim if the protective film on the
SAMSUNG logo or the bottom of the TV is not removed. If
protective film is attached, remove the film.
Control menu
TV Controller
button /
Remote control sensor
/
Microphone switch
/ *
Motion Sensor
TV Controller
button /
Remote control sensor
Microphone switch
࡙
*In
Art
mode, the Remote control sensor at the bottom of
the TV remains off.
*: The Frame Series only
Summary of Contents for 65QN9 D Series
Page 10: ......