English
05
Other Information
Issues
Solutions and Explanations
Others
The cable/set top box remote control
does not turn the TV on or off, or adjust
the volume.
• Program the Cable/Sat remote control to operate the TV. Refer to Cable/Sat user manual for
SAMSUNG TV code.
A “
Mode Not Supported
” message
appears.
• Check the supported resolution of the TV and adjust the external device’s output resolution
accordingly. Refer to resolution settings in this manual.
Caption
on TV menu is greyed out.
•
Caption
can not be selected in the TV menu when connected via HDMI or Component.
•
Caption
must be activated on the external device.
There is a plastic smell from the TV.
• This smell is normal and will dissipate over time.
TV
Signal information
is unavailable in
the
Self Diagnosis
Test menu.
• This function is only available with digital channels from an Antenna / RF/Coax connection.
(P. 22)
TV is tilted to right or left side.
• Remove the stand base from TV and reassemble it.
The
Channel
menu is grey out
(unavailable).
• The
Channel
menu is only available when the TV source is selected.
Your settings are lost after 30 minutes
or every time TV is turned off.
• If TV is in the
Store Demo
mode, it will reset audio and picture settings every 30 minutes.
Please change from
Store Demo
mode to
Home Use
mode in the
Plug & Play
procedure.
Press the
SOURCE
button to select
TV
mode, go to
MENU
-
Setup
-
Plug & Play
-
ENTER
.
You have intermittent loss of audio or
video.
• Check the cable connections and reconnect them.
• Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables
are flexible enough for long term use. mounting the TV to the wall, we recommend using cables
with 90 degree connectors.
The
PIP
menu is not available.
• PIP functionality is only available when you are using a HDMI, PC or components source.
You see small particles when you look
closely at the edge of the frame of
the TV.
• This is part of the product’s design and is not a defect.
POP (TV’s internal banner ad) appears
on the screen.
• Select
Home Use
under
Plug & Play
mode.
For details, refer to
Plug & Play
(Initial Setup). (P. 7)
✎
This TFT LCD panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However,
there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the
product.
F
Storage and Maintenance
✎
If you remove the attached sticker on the TV screen, clean the residues and then watch TV.
&&'6&53356&&/
'&165u/3&&/'&26
85HgH&5/&71
"5/'&/&85&/''255
2&&81
Summary of Contents for 630
Page 59: ...t t t t...
