Select Language
Main Page
Model
Connections
Installing the Stand Kit
Note
• Only the supplied bolts should be used.
Caution
Samsung Electronics will not be responsible for damages caused by using a base other than those
specified.
Installing the Semi Stand
Left stand
Right stand
Caution
Make sure to install the stand with the Caution label
folded backwards.
1)
A 'Cover-Protector' is used to protect the hole at the bottom of the LCD Display , where the stand is
inserted. Be sure to remove the 'Cover-Protector' when attaching the provided Semi Stand or stand kit (sold
separately) and cover the hole using the
'Cover-Hole
' when attaching the wall mount kit.
2)
Set up the left and right stands respectively.
3)
Insert the stand into the hole at the bottom of the LCD Display.
Insert the screw into the hole indicated and tighten it. (M4 x L15)
Caution
This stand is designed for adjusting the screen angle. The company is not responsible for any problem
caused when using this stand. Under no circumstances use the product as a stand for placing something on.
Safety Instructions
Introduction
I
Display
Troubleshooting
Specifications
Information
Appendix
Safety Instructions
Introduction
Package Contents
Your LCD Display
Machanical Layout
Using the Software
Adjusting the LCD Display
Troubleshooting
Specifications
Information
Appendix
Dodatak
ǷȘȐȓȖȎȍȕȐȍ
SyncMaster 400PX
/460PX
