Eco Sensor and screen brightness
Eco Sensor adjusts the brightness of the TV automatically. This
feature measures the light in your room and optimises the
brightness of the TV automatically to reduce power consumption.
If you want to turn this off, go to >
Menu
>
Settings
>
All Settings
>
General & Privacy
>
Power and Energy Saving
>
Brightness Optimisation
.
•
The eco sensor is located at the bottom of the TV. Do not
block the sensor with any object. This can decrease picture
brightness.
Changing the TV’s password
>
Menu
>
Settings
>
All Settings
>
General & Privacy
>
System Manager
>
Change PIN
Run
Change PIN
and then enter the current password in the
password field. The default password is "0000" (France: "1111").
Enter a new password and then enter it again to confirm it. The
password change is complete.
If you forgot your PIN code, press the buttons in the following
sequence to reset the PIN to "0000" (France: "1111"):
•
Press
(Volume) button. >
Volume Up
> >
Volume
Down
> >
Volume Up
> .
05 Specifications and Other
Information
Specifications
Display Resolution
QN7**C/QN8**C/QN9**C Series: 7680 x 4320
Other models: 3840 x 2160
Sound (Output)
CU7/CU8/Q6*C/Q7*C Series: 20 W
S9*C/Q8*C Series: 40 W
QN8*C/QN7**C Series: 60 W
QN9*C Series (43"): 20 W, QN9*C Series (50"): 40 W
QN9*C Series (55"-85"): 60 W
S95C/QN95C/QN8**C Series: 70 W
QN9**C Series: 90 W
Operating Temperature
10 °C to 40 °C (50 °F to 104 °F)
Operating Humidity
10 % to 80 %, non-condensing
Storage Temperature
-20 °C to 45 °C (-4 °F to 113 °F)
Storage Humidity
5 % to 95 %, non-condensing
Notes
•
This device is a Class B digital apparatus.
•
For information about the power supply, and more information
about power consumption, refer to the information on the
label attached to the product.
– On most models, the label is attached to the back of the TV.
(On some models, the label is inside the cover terminal.)
– On One Connect Box models, the label is attached to the
bottom of the One Connect Box.
•
Typical power consumption is measured according to IEC
62087.
•
To connect a LAN cable, use a CAT 7 (*STP type) cable for the
connection. (100/10 Mbps)
* Shielded Twisted Pair
•
The images and specifications of the Unpacking and
Installation Guide may differ from the actual product.
•
Figures and illustrations in this User Manual are provided
for reference only and may differ from the actual product
appearance. Product design and specifications may change
without notice.
An administration fee may be charged in the following situations:
(a) An engineer is called out at your request, but it is found
that the product has no defect (i.e., where the user manual has
not been read).
(b) You bring the unit to the Samsung service centre, but it
is found that the product has no defect (i.e., where the user
manual has not been read).
You will be informed of the administration fee amount before a
technician visits.
Following the repair by a non-authorised service provider,
self-repair or non-professional repair of the product, Samsung is
not liable for any damage to the product, any injury or any other
product safety issue caused by any attempt to repair the product
which does not carefully follow these repair and maintenance
instructions. Any damage to the product caused by an attempt to
repair the product by any person other than a Samsung certified
service provider will not be covered by the warranty.
Please visit samsung.com/support to find futher information
about external power adapter and remote control associated with
EU Ecodesign directive - ErP regulation
English - 7
Engl
ish