Samsung 400S8A User Manual Download

Page: 57 / 118

Chapter 4.

Settings and Upgrade

BIOS Setup

The BIOS Setup enables you to configure your computer hardware

according to your needs.

•

Use the BIOS setup to define a boot password, change the

booting priority, or add a new device.

•

Since incorrect settings may cause your system to

malfunction or crash, take care when configuring the BIOS.

•

The functions of the BIOS setup are subject to change for

product function enhancement purposes.

•

The BIOS Setup menus and items may differ depending on

your computer model.

Entering the BIOS Setup

Turn the computer on.

Immediately press the

key several times.

The screen images in this document may differ from actual

product.

After a moment, the BIOS setup screen appears.

The items in the BIOS setup may differ depending on the

product.

Summary of Contents for 400S8A























































































































Search results

Summary of Contents for 400S8A

Reviews:

Related manuals for 400S8A

Brands by name

Popular brands

Samsung 400S8A, User Manual

Search results

Summary of Contents for 400S8A

Reviews:

Related manuals for 400S8A

Brands by name

Popular brands