English-7
Installing on the Wall
1
Removing the Stand
Using a hexagonal wrench, remove the stand.
2
Removing Rubbers
Remove the four rubbers from the edges.
3
Mounting on the Wall
Mount the stand on the wall using screws or nails.
4
Fixing the Set
Using a hexagonal wrench, fix your set into the stand.
☛
Installation Notes
◆
Do not install your set on any place other than vertical
walls.
◆
To protect the performance of your set and prevent
troubles, avoid the followings:
- Do not install next to smoke and fire detectors.
- Do not install in an area subjected to vibration or high
voltage.
- Do not install in the wall.
- Do not install near or around any heating apparatus.
◆
Use only recommended parts and components.
rubens_monitor_eng 1/28/03 8:40 PM Page 7