English
_9
Save plug in, and then click Install on pop-up box of the Setup-Webplugin to
install. Restart the browser, and then enter the NVR IP address plus HTTP port,
such as http://192.168.1.200:80, to log in.
Download and Installation of plug in for Safari
Input the IP address and HTTP port on Safari, such as http://192.168.1.200:80,
and thenclick download to download the plug in. Click Download icon to have the
plug-in ‘WebPluginN.dmg’ downloaded.Double click ‘WebPluginN.dmg’. Double
click ‘SurveillanceClient.pkg’and then click Continue and Install. Enter user name
and password to install, thenclick Close to finish installation. Restart the browser,
and then enter the NVR IP address plus HTTP port, such as
http://192.168.1.200:80, to log in.
M
`
The above instructions are for first time installations. You can use the same plug-in for IE
and Google Chrome. If plug-in for windows OS was installed on IE or Google Chrome once,
you need to use IE which needs to be run as administrator.Use Google Chrome to log in to
NVR.
If you use Google Chrome to log in, please use Version 41 or lower. If you use V42 to V44 to
log in, you need to enable NPAPI plug-ins. You can enter chrome://flags/#enable-npapi on
URL bar of Google Chrome to find and enable NPAPI. Please note that it doesn’t support
V45 or above.
When you do a firmware upgrade, you have to re-download and re-install the plug-in. Based
on different situations, it may not be able to install the plug-in through browsers. In this
case, please copy and install the plug in on the CD attached(Web_plugin_Windows_YYYY_
MM_DD.exefor Windows system, and SurveillanceClient_Mac_YYYY_MM_DD.dmg for
Mac).
