Welcome Function
When a user stands close to the door lock, the keypad is automatically displayed, and
keytag and fingerprint sensor areas also enter authentication standby mode. Welcome
function and alarm notice function are enabled, and the voice guidence and alarm are
triggered when the user stands in front of the door lock for more than a minute.
Welcome function is on by default, and alarm notice function is set to Off by default for
the door lock system.
Dual Authentication Function
When configured, the user must consecutively authenticate both password and
fingerprint to open the door, and the security system is reinforced through this
configuration. Dual authentication mode can only be configured (enabled) when more
than one fingerprint has been registered. Dual authentication function is set to Off by
default for the door lock system.
Voice Guidence
A voice provides assistance regarding the door lock operation status.
voice guidence function is set to On by default for the door lock system.
Wi-Fi Configuration Function
When the Wi-Fi module has been equipped on the door lock, the Wi-Fi function is set to
On by default for the door lock system. App-based services cannot be used when this
function is turned off. It is recommended to turn off the Wi-Fi function if the app is not
being used. (Can reduce battery consumption)
Volume Settings
You can configure the volume for system sound, keypad entry sound,
voice guidence, etc. when opening the door. Open the battery cover on
the interior unit to adjust volume through the volume control switch,
and it is configured at [1] by default.
[0] Mute (Alarm excluded) [2] Max. volume
Auto Lock Time Setting Function
Auto lock time can be configured and auto lock time can be adjusted as necessary.
0 - 1 - 2
Additional functions and
setting method
6
To activate Welcome function and
Security mode
To activate Welcome function
To deactivate Welcome function
detection range : close range setting
detection range : middle range settings
detection range : long range settings
To activate Randomizer
To deactivate Randomizer
To activate Dual authentication
To deactivate Dual authentication
Door closing time
To activate Voice guidance
To deactivate Voice guidance
To activate Wi-Fi
To deactivate Wi-Fi
WPS mode
References
• Recognition distance may vary in an environment exposed to sunlight or intense light
• When configuring (enabling) the welcome mode in houses with corridors exposed to sunlight or houses with
lighting on permanently, be mindful that the door lock system will automatically sound the alarm when this
function is used.
• What is WPS (Wi-Fi protected setup)? This is a function designed for app users. After completing Wi-Fi
registration and when the wireless router must be changed during use, you can connect to security settings
via Wi-Fi for easy configu ration without a complex configuration process. This mode can only be used in an
environment that can support a WPS wireless router. Refer to the wireless router User Manual for WPS
instructions for the wireless router. Wireless router can only be used normally after registering Wi-Fi again
when the wireless router does not support WPS.
Refer to the following table to configure or disable other additional functions.
Open the battery cover on the interior unit and press
[Register] button.
Press the exterior keypad security button ( ) according to the
voice guidence
to enter
configuration mode. Select a function to use according to the
voice guidence
, and press the
Register button on the interior unit to suspend configuration before completion.
※ Door is not locked even if the door has been closed within default time (within 1 minute)
in configuration mode.
1
1
1
1
1
1
1
2
3
2
2
3
3
4
5
5
9
9
9
1
3
2
4
4
4
1
3
1
3
1
1
3
1
3
5
Randomizer Function
Enter two random digits displayed and then enter password for authentication
to prevent password leak. Randomizer function is set to On by default for the door lock
system.
How to use
security function
7
Lockout mode
This is a function to increase the difficulty of opening
the door from the inside. This prevents a stranger from
forcefully opening the Push-Pull lever from the inside
through abnormal methods when there is no one home.
TIP
How to Disable Alarm
To disable the alarm, use the registered authentication method
(Fingerprint/Password/Keytag/Mobile key/app) to open the door.
References
When the away mode function is disabled from inside, press the [DOUBLE LOCK]
button on the indoor lock to disarm the current state, and open the door with the handle
to easily open the door. (Alarm triggered)
Press [*] button within 3 seconds after turning on the away mode function
to enable the Lockout mode.
Caution
Within
3 seconds
Away mode Function
Away mode button ( ) is turned on when the door is locked after
the user leaves the house. Press the away mode button ( ) within 3
seconds to configure (enable) the function. After configuring (turning on),
the alarm will be triggered as the external alarm LED flashes when the door
is opened from the inside. It is recommended to only use this function
when there is no one home.
Configure :
Press the [DOUBLE LOCK] button on the
interior unit
for
3 seconds with the door lock being locked to enable the
function.
Disable :
The function is immediately disabled when
the door is opened from the inside.
Privacy mode Function
This function is configured when all family members have returned home in the
evening, or to protect personal privacy, and it can restrict the door from being opened
from the outside. Door lock cannot be opened through any authentication method
from the outside when this function is enabled. Be careful not to configure this function
when a child is present indoors.
※
Only use this function when there is a person inside when configuring (enabling) this function through
the app.
DOUBLE LOCK (3 seconds)
Anti-Tampering Function
(Door lock operation is suspended for 3 minutes when authentication fails 5 consecutive times.)
The door triggers the alarm when the operated incorrectly from the outside (outdoor),
and the door lock operation is suspended. The door lock triggers a failure alarm and
its operation is suspended for 3 minutes (cannot be used) after failing authentication 5
times consecutively. (Password, fingerprint, keytag, mobile key authentication failure).
Intrusion Detection Function
(※ Default function and cannot be disabled)
The door lock triggers the alarm when the door is forcefully opened from the inside/
outside. The door opening sensor detects an intrusion and the alarm is triggered for
5 minutes when the door is forcefully opened with the door lock being locked.
High Temperature Alarm Function
(※ Default function and cannot be disabled)
The alarm system is activated with the temperature sensor reacting to an abnormal
increase in indoor temperature (approx. 70°C +-10°C). LED on the [DOUBLE LOCK]
button on the interior unit flashes as the alarm is triggered for 15 seconds.
The door lock is automatically disabled after the alarm is turned off.
(The door lock is restored to normal operational state when the indoor temperature
drops to a certain temperature)
Battery Replacement
Replace the batteries immediately if the voice guidence is
activated after the battery replacement alarm (LED) is turned
on. Continuing to use without replacing the batteries on time
may result in the door lock shutting down due to lack of battery
power. Replace the batteries by pushing the interior unit cover
upwards to remove the cover.
How to replace the battery and
open the door during an emergency
9
This resets the mobile key and Wi-Fi
registration information.
(Master password, user password, fingerprint,
and keytag information are maintained)
Password is reset to ‘1234’
and all registered fingerprints, keytags,
and app information are deleted.
Master password
Door open
Door open
5S
Initialize the linked information (Wi-Fi)
Initialize the key information
4560852580
Initialization
8
TIP
What is reset? It is a function to perform factory reset for all information confi gured for the door lock.
5S
Password is changed to ‘1234’ after reset. You must change the password afterward.
Caution
•
Battery use time may vary depending on the battery manufacturer, manufacturing date, and
environment of use. (8 Alkaline batteries (1.5V AA), can be used for 10 months when used 10 times
per day, use time may be less than 10 months when Wi-Fi function is used)
•
Regularly check the battery state
(6 months is recommended) to prevent damage to product from battery leak.
•
When the battery replacement alarm is displayed on the door lock, some functions such as enter
registration mode, enter configuration mode, etc. may be restricted until the batteries are replaced.
Caution
Emergency Door Open
When the door lock is continued to be used without replacing the batteries despite
the battery replacement alarm, you won’t be able to use the door lock normally due to
a lack of battery power. Emergency power (Smartphone portable charger with micro
USB 5-pin connector) or mechanical override may be used to open the door in such an
instance.
Emergency Power
Connect the smartphone portable charger with micro USB 5-pin connector to the Micro USB
power input at the bottom of the exterior unit through micro USB 5-pin cable, and perform
authentication (fingerprint/password/keytag) to open the door by disabling the door lock.
Mechanical Override
Mechanical override can be used to open the door by disabling the door lock when the door
lock no longer operates due to lack of battery power or other circuit errors. Insert the
mechanical override in the mechanical override hole at the bottom of the exterior unit and
turn the key left or right to open the door.
Micro USB
power input
Mechanical over-
ride hole
Bottom of
exterior unit
•
Contact Samsung SDS customer service center (400-818-0177) to inquire about total key chip
replacement when the mechanical override has been misplaced.
(Total key chip replacement is a paid service.)
•
Keep the mechanical override at a safe location outside of the house for unforeseen
circumstances. (Vehicle, office, etc.)
Caution
