Item
Specifications
Voltage
AA Alkaline 1.5 Batteries (LR6) 4EA or 8EA (6V)
Emergency Power
Source
9V Battery (6LF22) (Separately sold)
Operation Method
Electronic Control Method
(Password, Fingerprint, Bluetooth, Card, Key Tag)
Weight
4.1 kg (including both inner and outer bodies)
Product
Dimensions
Outer Body
(including
the handle)
87.5mm(W) X 391.8mm(H) X 64.5mm(D)
Inner Body
(including
the handle)
88.5mm (W) X 357.6mm(H) X 69.3mm(D)
●
The contents of this user guide are subject to change without prior notice to the user
in order to enhance performance of the product.
10
11
12
7
8
9
DING DONG DENG
Deleting Registered Fingerprints & Cards
[Deleting All Fingerprints]
3. Entering the number (from the outside)
If you want to delete all fingerprints, press
[77] + [
] after step2.
DING DONG DENG
[Deleting All Cards]
3. Entering the number (from the outside)
If you want to delete all cards, press
[88] + [
] after step 2.
You can delete individual or all registered fingerprints and cards.
1. Pressing the [Register] Button
(from the inside)
2. Entering the Current Password
(from the outside)
Open the battery cover of the inner
body and briefly press the [Register]
button for 3 seconds.
Enter the current password when the
number pad is lighted, and press [
]
button.
DING DONG DENG
DING DONG
DING DING
3. Reading the Fingerprint to Be Deleted
When LED light on the Fingerprint Reading
Panel is on, touch the panel with the finger-
print to be deleted.
4. Exiting Fingerprint Deletion Mode
To end the deletion mode, press
[Registration] button.
DING DONG DENG
[Deleting Fingerprints]
Success:
DING DONG DENG
Fail:
DING DONG DING
DONG
DING
DING DONG DENG
You can delete Double authorization mode requires both fingerprint and
password to open the door, ensuring more security.
To setup the double authorization mode, one or more fingerprints must be
registered.
Double Authorization Mode Setting
DING DONG
DING DONG DENG
Briefly press the [Register] button on
the inner body.
Press the [
] button after pressing the
[4] or [6] button, and the authorization
mode will be set.
[4] Button : Double authorization
mode on
[6] Button : Double authorization
mode off
Two-factor Authentication Mode Operation
Touching [Number
Pad].
Enter the password when
the number pad is lighted,
and press the [
] button.
Touch a registered fingerprint
on the Fingerprint Reading
Panel. After a successful au-
thentication, the door opens.
Success:
DING DONG
DENG
Fail: DING DONG
DING DONG
Success:
DING DONG
DENG DONG
Fail: DING DONG
DING DONG
Open the battery
cover on the inner
body.
Put the [Sound Control]
switch on one of [0], [1], or
[2], and close the battery
cover.
Sound Setting and Releasing
The sound that is generated when the number buttons are pressed, when the
door is locked or when the locked door is unlocked, can be set according to the
user’s preference. The product is set to generate all sounds at the factory.
- [ 0 ] Button: All sounds except the alarm sound are deactivated.
- [1] and [2] Buttons: All sounds are activated and the sounds get bigger as the step
become higher.
~
Set the [Automatic/Manual Lock-
ing] toggle switch of the Inner
Body to the ‘A’/‘M’ position.
Open the battery
cover on the inner
body.
~
Automatic/Manual Locking Setting
The Automatic Locking mode allows for automatic locking of the door when it is
closed.
- Automatic: The door is automatically locked 1 seconds after being closed.
- Manual: The door does not lock automatically, and [CLOSE] button must be
pressed from the inside, touch [Number Pad] to close the door.
3. Entering a New Password
(from the outside)
4. Checking New Password Operation
(from the outside)
DING DING DENG
DING DONG DENG
DONG
Enter the new password (4 to 12
digits) and press the [
] button.
To make sure the password has been
properly registered, check the new pass-
word and close the door.
Warning
●
Manage your password with care so that unauthorized people
will not have access to it. Regularly changing your password can
reduce the risk of it being leaked.
Password Change
The password can be 4~12 digits number. Only one password can be registered.
1. Pressing the [Register] Button
(from the inside)
2. Entering the Current Password
(from the outside)
DING DONG DENG,
DING DING
DING DONG
Open the battery cover of the
inner body and briefly press the
[Register] button.
Enter the current password (‘1234’ after
initialization) when the number pad is
lighted, and press the [
] button.
~
Or
~
~
Security Assurance Mode Activation/Deactivation
At-home security mode is to prevent opening of the door from outside while
someone is inside.
Security Assurance Mode Activation
Security Assurance Mode Deactivation
DING DONG DENG
While the door is locked, press
[CLOSE] button on the inner body
part for 3 seconds.
DING DONG DENG
DONG
Pull the inner body han-
dle to open the door,
and it will deactivate.
Security Assurance Mode Operation
Inside: Press the [CLOSE] button, then the
sound for action-unavailable willbe
heard.
Outside: Press the [Number Pad] or touch with
a card, then the sound for action-un-
available will be heard.
Rapid beeping
Warning
●
When the security assurance function is activated, the door cannot be
unlocked from the outside, so please be careful. Be especially careful not
to allow children to set this mode accidently from the inside.
Or
~
Set up Instructions for Alarm and Anti unlock functions
Alarm function
When this function is activated, an alarm sound and light will turn on for approxi-
mately 5 minutes duration.
Anti-Bypass function
When this function is activated, the internal handle will become tightened to
prevent bypass attempts through door edge tools will be minimized.
DING DONG DENG
DING DONG DENG
Set up the Alarm function
Set up the Anti-Unlock function
When the door is closed, user can
set up the alarm function by press-
ing and holding the [ ] button for 3
seconds until sound confirmation.
Press [
] and hold.
After 3 seconds, the alarm will be
come active.
Release the Alarm function
Release the Anti-Bypass function
After touching the Number Pad,
have a registered fingerprint read,
or contact a registered card, or
enter the password and then
press the [
] button.
BEEP BEEP BEEP~
Warning
●
Anti-Bypass function should only be set up when there is no one inside.
Press the [CLOSE] button to release the
internal handle from Anti-Bypass function.
When this function is active, it may be
harder to pull the internal handle for elderly
or children to open the door from inside.
Welcome Function On/Off
The welcome function is a convenient function that automatically activates the
authorization standby mode when a user approaches the door, even before
touching the number pad.
DING DONG
Open the battery cover and press
[Registration] button briefly.
[1]+[
] button: Welcome function on, the one-
minute alarm function on
[2]+[
] button: Welcome function on, the one-
minute alarm function off
[3]+[
] button: Welcome function off
[5]+[
] button: Set up fingerprint Authentica-
tion standby mode
[8]+[
] button: Clear Fingerprint Authentication
standby mode
On and Off / Function Description
- Welcome function on: The mode will automatically activate the authorization
standby mode when a user approaches the door lock.
- Welcome function off: The mode will authorize a user when the user enters the
password on the number pad or connects a card to the number pad.
- One-minute alarm function on/ off: When someone remains in front of the door
lock for more than a minute, this mode will sound the tamper prevention alarm.
Caution
●
The factory defaults are set with the welcome function on and the alarm
function off.
●
The working distance of the infrared sensor can differ depending on light
conditions and other environments. When the front door is exposed to sun
light or constant bright lights it is advised to limit the usage of the sensor
as it might sound the alarm.
Default: 1 second
[51] : 1 second
[59] : 9 second
Door Lock Time Setup Function
This function sets the time interval between the moment the door open/closed
sensor recognizes the door as closed and the moment deadbolt locks the door.
In an environment that the door closes slowly and the deadbolt jams before the
door is fully closed, the situation can be fixed by adjusting the door lock time.
DING DONG
Open the battery cover of the
inner body and briefly press the
[Register] button.
Press [51] ~ [59] button, and then
press [
] button.
Intrusion Detection Function
This function generates the alarm sound when an attempt is made to forcefully
open the door from the inside or the outside.
(This is a basic function of the lock, and cannot be separately set or released.)
If the door is forcefully opened while locked, the door opening sensor
detects it and generates the alarm sound.
Replacing the Batteries
Battery Replacement Alarm Generation
If the melody of “Blues for Elise” sounds when opening the door with the pass-
word or a card (key tag), it is time to replace the batteries.
(The low battery indicator is lighted when the melody sounds.)
Replacing the Battery
Replace all 8 batteries within a 1 week of the first alarm sound.
- The unit will stop operating suddenly if the batteries are not replaced.
Warning
●
Depending on battery manufacturer, date of manufacture and the user
environment, the duration of use may vary.
(In the case of average use, given as 10 times a day, 8 AA alkaline
1.5Vbatteries can last for 10 months.)
●
If the poles of the batteries are not placed properly, the lock will not operate
normally.
●
Liquid leaks from batteries can damage the product. Check the batteries
regularly (every 6 months).
●
After the battery replacement alarm has sounded, password/card information
cannot be registered, changed, deleted, initialized or configured until the
batteries are replaced.
Purchase an emergency battery (9V) at the nearest store.
- As the alkaline batteries offer longer life, they are recommended over the
manganese batteries or rechargeable ones.
While connecting a 9V battery
to the contact point, it is
available to use fingerprint,
card and password.
Using the Emergency Battery
If the batteries are not replaced after their replacement time comes, they will be
completely discharged and the lock will not operate.
Opening the Door Using an Emergency Battery
Alarm Sound (Prank Prevention Function)
This function generates an alarm sound and deactivates lock operation
when it is improperly handled from the outside.
This alarm will sound if an attempt is made to open the door with an invalid card, or
if a wrong password is entered five times in a row.
The alarm sound is generated, and the lock is deactivated for 3 minutes. While the
door is in this inactive mode, a single “DING” sound is generated every 10 seconds
and seven consecutive “DINGS” will sound after 3 minutes. Following this, the lock
is released from inactive mode.)
Releasing the Alarm
Inside
Outside
Press the [Register] button.
Apply the registered card or key tag to the card reader, or enter
the password and then press the [
] button.
Built-in Fire Detection Function
This function generates the alarm sound when fire is detected so that the resi-
dence can quickly respond. The built-in fire detection function is a basic function
of the lock, and cannot be released by the user.
Fire detection function is operational at about 70 °C ± 10 °C; this can vary
depending on the installation environment.
When fire occurs, the temperature sensor detects it and flashes the [Close] button
while generating the alarm sound.
The door is automatically opened after the alarm sound has stopped.
(The lock resumes normal operation if the inside temperature returns to
a normal level.)
The built-in fire detection function is activated when the temperature rises around
60°C, which may differ depending on the installation environment.
Product Specifications
Multi-leveled Security Code Entry Mode
You can set the security mode suitable for your use when you open the door
using a password.
DING DONG
DING DONG DENG
Briefly press the [Register] button on
the inner body.
Press the [
] button after pressing the [7] or
[9] button, and the security mode will be set.
[7] Button : Multi-leveled Security
Code Entry Mode
[9] Button : Common Mode
