memory no less than 4GB. The device support maximum 32GB TF card.
b. Please turn off the device before unplug TF card.
3) Tide the device and mounting on windshield.
[Caution]
Place the mounting stand on a safe and clear spot, suggesting to
place beside rear-view-mirror. Please cleanse window before mounting.
4) Plug in car charger into the car cigarette lighter.
5) Connect car charger to the Car DVR USB input with charging Cable.
6) Adjust camera position, ensure the line of sight is perpendicular to the
ground.
7) Starting engine, check if DVR has been installed correctly.
[Caution]
If DVR has been installed correctly, indicator light flashes and
device will be entering video recording mode automatically when engine starts.
2. Operating Instructions
1) Automatically Recording Function
Start video recording automatically when engine turns on, charging indicator
and video recording indicator start flashes. After engine been shut down, video
recording stops automatically. Recorded videos have been saved in TF card and
loop recording earliest video while memory is full.
[Caution]
Video length can be set in menu, 2/3/5 minutes adjustable, default
setting is 3 minutes.
2) Manually Recording Function
To start up DVR, shortly press power button and the video recording function
activated automatically. To shut down DVR, press power button for 3 seconds,
last video have been saved automatically before power off.
3) Photographic Mode
To enter photographic mode, shortly press MODE button. Icon of video that is
shown on upper left corner of display has changed into icon of Camera. Shortly
press REC button for taking photos. Press MODE again for playback.
4) Movement Detection
To enter movement detection, press Menu button and select movement
detection from setting list. Change setting of movement detection to “on”.
