Samson TROVIS 5724-3, Mounting And Operating Instructions

Page: 41 / 72

EB 5724 EN 8-7
Operation
Data transmission between the actuator
and memory pen
The memory pen is connected to the actuator
as shown in Fig. 8-3. Refer to the TROVIS-
VIEW Operating Instructions
u
EB 6661 on
how to transfer data.
The yellow LED on the actuator indicates that
the data logging is being prepared. Data
transmission is completed when the yellow
LED is illuminated continuously.
8.5.1 Copying function
The memory pen can be used to copy setting
data to other TROVIS 5724-x Actuators after
the data from the actuator have been trans-
ferred to the memory pen.
“Automatically write to memory pen” is auto-
matically reset to the read status after data
are transferred from the actuator for the first
time.
Note
1 2
1 Memory pen
2 Serial interface
(RJ12 jack)
Fig. 8-3: Connecting actuator and memory pen
Blinking pattern of the red LED
− Memory pen inserted
On
Off
Time in s