Samson TROVIS 5573, Mounting And Operating Instructions

Page: 18 / 146

18 EB 5573 EN
Operation
2.8.1 Setting public holidays
On public holidays, the times-of-use specified for Sunday apply. A maximum of 20 public
holidays may be entered.
Parameters WE Level: value range
Public holidays – Extended information level: 01.01 to 31.12
Proceed as follows:
1. In the extended information level (normal switch position
) select the data point for public holidays [
q
].
Reading:
2. Open data point for public holidays.
3. Select – –.– – on the display [
q
] (if applicable).
4. Activate editing mode for public holidays [
Û
].
and blink.
5. Select public holiday [
q
].
6. Confirm the public holiday setting [
Û
].
Î
To enter additional public holidays, re-select – –.– – and repeat the steps 4 to 6.
Public holidays can also be entered in PA5 parameter level (see section 3.3).
Deleting a public holiday
1. Under data point for public holidays, select the holiday you wish to delete [
q
].
2. Confirm setting [
Û
].
3. Select – –.– – on the display [
q
].
4. Confirm setting [
Û
].
The public holiday is deleted.
Note