Samson TROVIS 5573, Mounting And Operating Instructions

Page: 102 / 146

102 EB 5573 EN
Communication
Risk of damage of the heating circuit due to lightning or overvoltage.
Upon installation, observe the relevant standards and regulations governing lightning and
overvoltage protection.
Functions WE Configuration
Modbus 1 CO6 > F01 - 1
16-bit address 0 CO6 > F02
Monitoring 0 CO6 > F07
Parameters
1)
WE Parameter level: value range
Station address (ST) 255 PA6: 1 to 247
With CO6 > F02 - 1: 1 to 32000
Description of communication parameter settings
−
Station address (ST)
This address is used to identify the controller in bus or modem mode. In a system, each
controller needs to be assigned a unique address.
10.2 Memory module/mini module
The use of a memory module (order no. 1400-9379) or a mini module (order no. 1400-
7436) is particularly useful to transfer all data from one TROVIS 5573 Controller to several
other TROVIS 5573 Controllers.
In contrast to the memory module, the mini module is not suitable for transferring the pro -
grammed vacations to the individual control circuits or a data logging configuration pro -
grammed in TROVIS-VIEW.
The memory module/mini module is plugged into the RJ-45 connector socket located at the
side of the controller. Once the module has been connected, '73 SP' appears on the control-
ler display. If the memory module already contains data from a different TROVIS 5573 Con-
troller, turn the rotary pushbutton until 'SP 73' is displayed.
−
Pressing the rotary pushbutton to confirm '73 SP' causes the controller settings to be
transferred to the memory module/mini module.
NOTICE !
Note