background image

PRODUCT SPECIFICATION SHEET

SERIES

 

DESCRIPTION

 

CATEGORY

SERVO 300

 

POWER AMPLIFIER

 

AMPLIFIERS

SERVO 300

ARCHITECT’S & ENGINEER’S SPECIFICATIONS

The Samson Servo 300 shall be a two space rackmount 
stereo power amplifier. It shall deliver 150 watts per channel 
at 4 Ohms or 300 watts into 8 Ohms in bridge mono mode. 
It shall have 1/4 inch balanced inputs and RCA unbalanced 
inputs. It shall be a bi-polar design and use a toroidal 
transformer. The front panel shall have volume controls and 
LED metering for each channel. The rear panel shall also 
have 5 way binding posts for the amplifier outputs.

SERVO 300 SPECIFICATIONS

Stereo both channel driven

 

8 Ohms .............................. 100 Watts x 2

 

4 Ohms .............................. 150 Watts x 2

Bridged mono

 

8 Ohms .............................. 300 Watts

Signal to Noise Ratio

 (20Hz-20k) ...... 102dB

Distortion

 (SMPTE-IM) ..................... 0.01%

Input sensitivity

 @8 Ohms ................ 1.24V(4dBu)

Voltage Gain

 .................................... 33dB

Output Circuitry Class

 ....................... AB

AC Power

@1/8 rated power 4 Ohms, max. ....... 0.7A

@1/3 rated power 4 Ohms, max. ....... 1.7A

@ rated power 4 Ohms, max. ............ 5.0A

Distortion 

(typical @4 Ohms)

 

20Hz-20kHz,10dB 

 

below rated power ............... 0.01%

 

1kHz,rated power ................ 0.1%

Frequency Response

@8 Ohms, 1Watt, 20Hz-20kHz ........... +0/-0.5dB

Damping Factor 

(400Hz) ................... 280

Input Impedance

 ..............................  15k Ohm Unbalanced, 

30k Ohm Balanced

Input Clipping

 .................................. 10Vrms (22dBu)

Cooling

 ...........................................  Continuously variable speed, 

fan forced air

Connectors

 (each channel)

 

Input .................................  RCA unbalanced and 

1/4”(6.3mm) TRS, balanced 

 

Output ...............................  5-way Binding post and 

1/4” Phone

Controls

 ..........................................  AC power switch,Channel 1 

and 2 volume

Indicators

 .......................................  Power on (blue), Protection 

(amber), Signal (green) for each 

Ch., Peak(red) for each Ch. 

Level: , -24 dB, -20 dB, -16 dB, 

-12 dB, -8 dB, -4 dB, -2 dB. O, 

+2 dB and +4 dB (PEAK).

Protection

 .......................................  Short circuit,Thermal,Current 

limit,DC offset,Current inrush, 

RF protection, Turn on/Turn 

off muting

Power Requirements

 ......................... 115/230,240VAC,50/60Hz

Dimensions

 (W x H x D) ....................  19” x 3.5” x 11.7” 

(483mm x 89mm x 297mm)

Net Weight

 ...................................... 20 lbs (9.09 kg)

FEATURES

 

(continued)

>

  10 segment LED signal indicators for each channel 

continuously display power output levels and allow you to 
correct for overloading (clipping) conditions.

>

  Unique stable bipolar circuit design that continuously 

keeps DC output during idling at or near zero volts (thus 
keeping idle speakers at their zero point). This serves to 
minimize heat overload problems by effectively preventing 
the Servo Series from applying power when unnecessary.

>

  Forced air cooling via two temperature-sensitive, variable 

speed fans provides reliable performance without thermal 
and overheating problems.

>

  Protection relay circuitry (with dedicated LEDs for each 

channel) that guards against overheating or faulty wiring 
conditions and also prevents “thumps” when powering on or 
off. This means that you can use the Servo 300 with a single 
power strip into which a mixer or other audio devices are 
connected, without danger of damage to connected speakers.

>

  Input connectors for each channel accommodate both RCA 

or balanced 1/4-inch TRS plugs.

>

  Output connections are made via 5-way binding posts.

>

  Toroidal transformer power supply for high current and low profile.

>

  The Servo 300 can be mounted in any standard 19" rack 

(taking just two rack spaces), making it easy to integrate 
the amp into any fixed or traveling PA rig.

>

  Rugged construction (an all-steel chassis with a cool gray 

finish and a lightweight anodized aluminum heat sink) 
makes the Servo 300 eminently roadworthy.

>

  Extended three-year warranty.

437.5 mm

483 mm

88 mm

297mm

POWER

Reviews: