background image

Introduction

Thank you for purchasing the S patch plus 48-channel, fully balanced patchbay
by Samson Audio! 

The S patch plus has been designed to provide a convenient, central point to
make all your audio connections. Featuring solid construction with 48, 1/4 inch
phone plugs on the front and 48, 1/4 inch phone plugs on the rear, the S patch
plus will provide  reliable operation while maintaining a clean signal path. In
addition, the S patch plus features high quality, miniature toggle switches allow-
ing each channel to be configured for either Normalled, Half-normalled or Thru
operation. And since these mini-toggle switches are conveniently located on the
front panel, you can instantly change any channels configuration without the
need to remove the unit from the rack. Whether you’re working in a personal
studio or larger professional studio, using one or more S patch plus’ will elimi-
nate the need to make connections by reaching around the back of your mixer
or equipment rack. S patch plus helps you work cleaner and faster, allowing you
to focus on making a better production.

In these pages, you’ll find a detailed description of the features of the S patch
plus, as well as a description of its front and rear panels, step-by-step instruc-
tions for its setup and use and full specifications. You’ll also find a warranty card
enclosed—please don’t forget to fill it out and mail it in so that you can receive
online technical support and so we can send you updated information about
these and other Samson products in the future.

We recommend you record your serial number in the space provided below for
future reference.

Serial number:

Date of purchase:

Should your unit ever require servicing, a Return Authorization number (RA)
must be obtained before shipping your unit to Samson. Without this number, the
unit will not be accepted. Please call Samson at 1-800-3SAMSON (1-800-372-
6766) for a Return Authorization number prior to shipping your unit. Please
retain the original packing materials and if possible,  return the unit in the origi-
nal carton and packing materials.

2

Summary of Contents for S-patch plus









Reviews: