S direct Front and Rear Panel Layout
1
LEFT INPUT
- 1/4” input connector.
2
LEFT OUTPUT/LINK
- 1/4” output for
2
LEFT OUTPUT/LINK
2
LEFT OUTPUT/LINK
passing the input signal through to a
stage amplifier or monitor system.
3
LEVEL SWITCH
- When engaged, the
level is switched from instrument GTR to
amplifier speaker SPK level.
4
RIGHT INPUT
- 1/4” input connector.
5
RIGHT OUTPUT/LINK
- 1/4” output for
5
RIGHT OUTPUT/LINK
5
RIGHT OUTPUT/LINK
passing the input signal through to a
stage amplifier or monitor system.
A
BATTERY COMPARTMENT
- Houses
a standard 9 Volt Battery.
B
GROUND LIFT
- When the switch is
engaged, the input ground (shield)
is disconnected from the S direct
plus circuit ground.
C
RIGHT BALANCED OUTPUT
- Male
XLR connector.
D
LEFT BALANCED OUTPUT
- Male
XLR connector.
E
BATTERY/PHANTOM
- Switches S
direct plus from phantom power to
battery operation.
3
Powering S direct plus
The S direct plus can operate on a single 9 Volt battery or standard 24-48 volt phan-
tom power. Whenever phantom power is present on the XLR cable that is connected
to the Balanced Output, the S direct plus will automatically switch to phantom power
and disconnect the 9 Volt battery. In fact, when the Battery switch is in, the S direct
plus will sense the voltage and chose which ever is greater. The Phantom/Battery
switch can be used to turn off the battery power when the unit is not in use.
�
�
�
�
�
1
2
3
4
5