ARCHITECT’S & ENGINEER’S
SPECIFICATION
The microphone shall be of a dynamic type
with hypercardioid polar pattern. The micro-
phone shall provide its output on a gold-plated
male XLR-type connector. Output impedance
shall be 150 ohms.
The microphone shall be constructed of a
zinc casing and shall contain a triple-plated
multi-stage windscreen and noise filter for the
removal of pops, sibilance and onstage noise, an
aluminum humbucking voice coil for the elimi-
nation of magnetic field interference and true
hum rejection, a Neoprene transformer cover
for the reduction of microphonics, a high-out-
put Neodymium element, and a multi-axis
shock-mount to minimize handling noise. The
microphone shall have frequency response
from 20 Hz to 18.5 kHz, sensitivity of -47 dBV at
94 dB SPL, and a maximum SPL of 137 dB.
Dimensions shall be 2.25
″
(57 mm) head length,
4.5
″
(114.2 mm) main unit length and 6.75
″
(172 mm) total length. Weight shall be 8.7 oz.
(250 g). The microphone shall carry a three-
year warranty.
The microphone shall be a SAMSON Q
MIC
.
Q
MIC
SPECIFICATIONS
Type:
Dynamic
Polar pattern:
Hypercardioid
Frequency response:
20 Hz - 18.5 kHz
Sensitivity:
-47 dBV @ 94 dB SPL
Max.SPL:
137 dB
Output impedance (@ 1 kHz):
150
Ω
Connector:
3-pin gold-plated balanced XLR male
Dimensions
Head length:
2.25
″
• 57 mm
Main unit length:
4.5
″
• 114.2 mm
Total length:
6.75
″
• 172 mm
Weight:
8.7 oz. / 250 g
Specifications subject to change without notice. © 1998 SAMSON
1.0
0.8
0.6
0.4
0.2
0
20000
10000
5000
2000
1000
500
200
100
50
20
-40
-30
-20
-10
0
10
-20
-15
-10
-5
0
5
A • B
Span range : ___
B
Writing Speed : ____sec.
0.5
Ref. 0dB Level : ___dB
0
Paper Speed :____mm/sec.
10
LINEAR
S / N
FREQUENCY Hz
Q
MIC
Measuring Obj.;
Date:
dB
V
SAMSON
(Hz)
1/2/96
300Hz
1000Hz
3000Hz
Scale is 5 decibels per division
0
°
30
°
60
°
90
°
120
°
150
°
180
°
210
°
240
°
270
°
300
°
330
°