Samson PowerStrip PS10, Owner'S Manual

Page: 4 / 16

2
Introduction
Congratulations on purchasing your Samson PowerStrip, PowerBrite, or PowerBrite
Pro! This manual covers three products: the PowerStrip PS10; the PowerBrite PB10;
and the PowerBrite PB10Pro. All three of these single-space rack units provide
multiple outlets for reliable power distribution with 3-point surge and spike
protection, plus RF (Radio Frequency) filtering. The three products differ in that the
PowerBrite and PowerBrite Pro also provide dual front-panel LED lamps (in retractable
cylinders), with dimmer control, which can be used to fully illuminate your entire
rack of gear. In addition, the PB10 and PB10Pro also provide a rear-panel USB socket
to use with the included LED gooseneck lamp so you can see the back of your
gear. For advance control, the PowerBrite PB10Pro's feature front-panel voltmeter
and ammeter, each with their own large LED display so you can easily monitor
the condition of your power source. The steel chassis and solid build construction
makes the PowerStrip and PowerBrite series reliable tools on the road or in fixed
installations.
In this manual, you’ll find a more detailed description of the features of your
PowerStrip PS10, PowerBrite PB10, or PowerBrite PB10Pro, as well as instructions for
its use and complete specifications. You’ll also find a warranty card enclosed—don’t
forget to fill it out and mail it in! This will enable you to receive online technical
support and will allow us to send you updated information about other Samson
products in the future. Also, be sure to check out our website (www.samsontech.com)
for complete information about our full product line.
With proper care and adequate air circulation, your PowerStrip PS10, PowerBrite PB10,
or PowerBrite PB10Pro will operate trouble free for many years. We recommend you
record your serial number in the space provided below for future reference.
Serial number: __________________________________
Date of purchase: ________________________________
SPECIAL NOTE: Should your PowerStrip PS10, PowerBrite PB10, or PowerBrite PB10Pro
ever require servicing, a Return Authorization number (RA) is necessary. Without this
number, the unit will not be accepted. If purchased in the United States, please call
Samson at (516) 364-2244 for a Return Authorization number prior to shipping the
unit. If you purchased your Samson product outside the United States, please contact
your local distributor for warranty information and service. Please retain the original
packing material and, if possible, return the unit in its original carton and packing
materials.
WARNING:
Though the PowerStrip PS10, PowerBrite PB10, and PowerBrite PB10Pro
all provide both surge and spike protection, they are not designed to protect
against major overload situations such as lightning strikes or connection to incorrect
voltage supplies. In the event of either occurrence, unplug all connected equipment
immediately and have your PowerStrip PS10, PowerBrite PB10, or PowerBrite PB10Pro
evaluated by Samson Technical Support or by an authorized Samson service center
before using it again.