50 oz. barium ferrite magnet
HF Driver
1
″
compression driver
Mounting
Integral 1 3/8
″
Pole Mount Receptacle, Fly Points
Dimensions
21 1/4
″
(h) x 14 5/8
″
. (w) x 17 3/8
″
(d)
539 mm (h) x 371 mm (w) x 441 mm (d)
Weight
28.5 lbs • 12.9 kg
XP200
Power Rating:
160 Watts LF; 40 Watts HF
Frequency Response
60 Hz – 15 kHz
Sensitivity
97 dB SPL @ 1W/1m
Crossover Frequency
2.3 kHz (12 dB Per Octave Linkwitz-Riley Constant
Phase)
LF Driver
12
″
heavy-duty driver
2.5
″
voice coil (Kapton Former)
50 oz. barium ferrite magnet
HF Driver
1
″
compression driver
Mounting
Integral 1 3/8
″
Pole Mount Receptacle, Fly Points
Dimensions
21 1/4
″
(h) x 14 5/8
″
. (w) x 17 3/8
″
(d)
539 mm (h) x 371 mm (w) x 441 mm (d)
Weight
42.0 lbs • 19.0 kg
XP300
Power Rating:
160 Watts LF; 40 Watts HF
Frequency Response
60 Hz – 15 kHz
Sensitivity
97 dB SPL @ 1W/1m
Crossover Frequency
2.3 kHz (12 dB Per Octave Linkwitz-Riley Constant
Phase)
LF Driver
12
″
heavy-duty driver
2.5
″
voice coil (Kapton Former)
50 oz. barium ferrite magnet
HF Driver
1
″
compression driver
Stereo Mixer Section
Inputs
2 Mic/Line XLR/TRS
1 Stereo Line w/Mic TRS/RCA/XLR
Outputs
+4 Balanced XLR
Frequency Response
10 Hz - 50 kHz
Crosstalk
70 dB @ 1 kHz
Equalization Frequencies
100 Hz (Low), 10 kHz (High)
Effects
DSP Reverb with 6 Presets
Mounting
Integral 1 3/8
″
Pole Mount Receptacle, Fly Points
Dimensions
21 1/4
″
(h) x 14 5/8
″
. (w) x 17 3/8
″
(d)
539 mm (h) x 371 mm (w) x 441 mm (d)
Weight
45.0 lbs • 20.4 kg
dB500
Power Rating:
500 Watts Program
Frequency Response
60 Hz – 15 kHz ± 3 dB
Sensitivity
97 dB SPL @ 1W/1m
Crossover Frequency
2.3 kHz (24 dB Per Octave)
LF Driver
15
″
heavy-duty driver
2.5
″
voice coil (Kapton Former)
50 oz. barium ferrite magnet
HF Driver
1.75" titanium compression driver
Mounting
Integral 1 3/8
″
Pole Mount Receptacle
15º wedge monitor position,
30º wedge monitor position, Ten Fly Points
Dimensions
30
″
(h) x 19
″
(w) x 17
″
(d)
762 mm (h) x 483 mm (w) x 432 mm (d)
Weight
53.4 lbs • 24.2 kg
dB500a
Active Power:
400 Watts LF, 100 Watts HF
Frequency Response
60 Hz – 15 kHz ± 3 dB
Sensitivity
97 dB SPL @ 1W/1m
Crossover Frequency
2.3 kHz (24 dB Per Octave)
LF Driver
15
″
heavy-duty driver
2.5
″
voice coil (Kapton Former)
50 oz. barium ferrite magnet
HF Driver
1.75" titanium compression driver
Mounting
Integral 1 3/8
″
Pole Mount Receptacle
15º wedge monitor position,
30º wedge monitor position, Ten Fly Points
Dimensions
30
″
(h) x 19
″
(w) x 17
″
(d)
762 mm (h) x 483 mm (w) x 432 mm (d)
Weight
tbd
EX500
Transducer:
15
″
Heavy Duty Driver, 3
″
voice coil, aluminum former
Amplifier:
High-efficiency tracking converter
Power Rating:
500 Watts RMS
Frequency response
30Hz- 300Hz+/-3 dB
Sensitivity:
94dB SPL @ 1 W/1m
Input
Balanced
Connector:
XLR - FEMALE
Output
Balanced, high-passed tracking low frequency
crossover point
Connector:
XLR - MALE
Crossover Frequency:
Variable 30Hz – 200Hz
Switch Functions
Stereo /Mono:
Selects stereo or mono low frequency oper-
ation
Enclosure
Construction:
3/4" plywood, carpet covered
Finish:
Black carpet
Corners:
Steel
Casters:
Three Inch Heavy Duty
Mounting:
Integral 1 3/8" (35mm) Pole Mount
Receptacle,
Dimensions:
20” (h) x 24” (w) x 22.75” (d)
508 mm (h) x 610 mm (w) x 578 mm (d)
Weight:
71 lbs. •
32.25 kg
Microphones
C01
Frequency Response
40~18000 HZ
Polar pattern:
Hyper-
cardioid
Element type
Back condenser type
Diaphragm thickness
3 microns
Sensitivity
-33 dB/Pa
SPL
136 dB
Power supply voltage:
phantom power 36V - 52V
Weight
2 lbs. (30.9 kg)
Dimensions
7" (h) x 2.125" (w) x 2.125" (d)
180 mm (h) x 54 mm (w) x 54 mm (d)
Shipping Weight
2.5 lbs.(1.15 Kg)
C02
Frequency Response
TBD
Polar pattern:
condenser-
cardioid
Element type
condenser
C03
Frequency Response
TBD
Polar pattern:
Switchable cardioid, omni,
figure-8
Weight
2 lbs. (30.9 kg)
Dimensions
7" (h) x 2.125" (w) x 2.125" (d)
180 mm (h) x 54 mm (w) x 54 mm (d)
Shipping Weight
2.5 lbs.(1.15 Kg)
C05
Frequency Response
TBD
Polar pattern:
condenser-
cardioid
Element type
condenser
Q1
Type:
Condenser
Polar pattern:
Cardioid
Frequency Response:
50 Hz – 20 kHz
Sensitivity:
-68dB ±3dB
Max.SPL:
142 dB
Output Impedance (@ 1 kHz):
150
Ω
Connector:
3-pin gold-plated balanced XLR male
Power Requirements:
Supply Voltage (Phantom) 11 to 52 Vdc
Dimensions:
7
″
• 176 mm overall
Weight:
8.5 oz • 240 g
Q
MIC
Type:
Dynamic
Polar pattern:
Hypercardioid
Frequency Response:
20 Hz – 18.5 kHz
Sensitivity:
-47 dBV @ 94 dB SPL
Max.SPL:
137 dB
Output Impedance (@ 1 kHz):
150
Ω
Connector:
3-pin gold-plated balanced XLR male
Dimensions:
6.75
″
• 172 mm overall
Weight:
8.7 oz. • 250 g
Q2
Type:
Dynamic
Polar Pattern:
Cardioid
Frequency Response:
50 Hz – 15 kHz
Sensitivity:
-71 dB ±3 dB
Max. SPL:
137 dB
Output Impedance (@ 1 kHz):
600
Ω
(Lo Z)
High Pass Range:
-12 dB/octave (HP switch ON)
Attenuation Range:
-10 dB/average (ATT switch ON)
Connector:
3-pin gold-plated balanced XLR male
Dimensions:
6
″
• 152mm overall
Weight:
10.5 oz. • 300g
Q3
Type:
Dynamic
Polar Pattern:
Hypercardioid
Frequency Response:
50 Hz – 15 kHz
Sensitivity:
-71 dB ±3 dB
Max. SPL:
137 dB
Output Impedance (@ 1 kHz):
600
Ω
(Lo Z)
High Pass Range:
-12 dB/octave (HP switch ON)
Attenuation Range:
-10 dB/average (ATT switch ON)
Connector:
3-pin gold-plated balanced XLR male
Dimensions:
7
″
• 178 mm overall
Weight:
15.1 oz. • 431g
Q7
Type:
Dynamic
Polar pattern:
Cardioid
Connector:
3-pin gold-plated balanced XLR male
Dimensions:
7
″
• 177 mm overall
Weight:
13 oz. • 368 g
Q Snare
Type:
Dynamic
Polar pattern:
Cardioid
Connector:
3-pin gold-plated balanced XLR male
Q Tom
Type:
Dynamic
Polar pattern:
Cardioid
Connector:
3-pin gold-plated balanced XLR male
Q Kick
Type:
Dynamic
Polar pattern:
Cardioid
Connector:
3-pin gold-plated balanced XLR male
R11
Type:
Dynamic
Polar Pattern:
Hypercardioid
Frequency Response:
60 Hz – 18 kHz
Sensitivity:
-75 dB ±3 dB
Max. Input Level (1 kHz):
130 dB SPL
Output Impedance (@ 1 kHz):
400 ohm (Lo Z)
Connector:
3-pin XLR male (pin 2 hot)
Dimensions:
6.85
″
• 174 mm overall
Weight:
8.8 oz. • 250 g
R21
Type
Dynamic
Frequency Response
80 Hz - 12 kHz
Polar Pattern
Cardioid
Output Impedance
Rated at 500
Ω
Sensitivity
-53 dBV/pa (1.8 mv/pa)
Connector
3-pin gold plated balanced XLR male
Dimensions
Head length
2.125 in. / 53.97 mm
Main unit length
4.56 in. / 115.88 mm
Total length
6.85 in. / 169.8 mm
Weight
7 oz. / 217 g
R21S
Same as above, with on/off switch
HM40
Type:
Condenser
Polar pattern:
Cardioid
Connector:
3-pin mini-XLR
S11
Type:
Dynamic
Polar pattern:
Unidirectional cardioid
Frequency response:
60 Hz – 18 kHz
Sensitivity:
-74 dB ±3 dB
Max. input level (1 kHz):
130 dB SPL
Output impedance (@ 1 kHz):
600
Ω
±30%
Connector:
3-pin XLR male
Dimensions:
6.75
″
• 172 mm overall
Weight:
8.7 oz. • 250 g
S12
Type:
Dynamic
Polar Pattern:
Hypercardioid
Frequency Response:
60 Hz – 18 kHz
Sensitivity:
-70 dB ±3 dB
Max. Input Level (1 kHz):
130 dB SPL
Output Impedance (@ 1 kHz):
600
Ω
±30%
Connector:
3-pin XLR male
Dimensions:
6.75
″
• 172 mm overall
Weight:
8.7 oz. • 250 g
VP1
R21 Microphone same as above
Tripod Mic Stand
Heavy-duty Die Cast and Steel
Non-slip Easy Grab Clutch
Over-sized Rubber Feet
Mic Clip with Euro Adapter
Mic Cable
Type
XLR-Low Noise High Performance
Length
25
′
• 7.62 m
Shipping Weight:
8.5 lbs. • 3.85 kg
Q
E
and Q
V
Generating Element:
Back electret cardioid condenser
Polar Pattern
Q
V
:
Hypercardioid
Q
E
(water-resistant):
Bi-directional noise cancelling,
pressure gradient type
Mounting system:
Adjustable headband and gooseneck
Sensitivity
Q
V
:
70 mV @ 114 dB SPL
Q
E
:
80 mV @ 114 dB SPL
Max.SPL:
145 dB
Weight:
1.92 oz. • 54.4 grams
PM4 (For use with QE/QV Headset Mics)
Connectors
Input:
TA3M Switchcraft
Output:
XLR male
Operating Voltage:
12 Vdc through 48 Vdc
Dimensions
Length:
3.7
″
• 93.75mm
Diameter:
0.86
″
• 22mm
Weight:
3 oz. • 85 grams
Headphones
RH600
Driver Unit:
40mm Diaphragm Drivers with Neodymium
Magnet
Frequency Unit:
20-22,000 Hz
Impedance:
40ohm ± 10%
Sensitivity:
115dB SPL at 1kHz ± 3dB
Input Connector:
Gold-Plated Mini Stereo Plug and
1
⁄ 4
″
Phone Adapter
RH300
Driver Unit:
40mm Diaphragm Drivers with Neodymium
Magnet
Frequency Unit:
20-22,000 Hz
Impedance:
32ohm ± 10%
Sensitivity:
106dB SPL at 1kHz ± 3dB
Input Connector:
Gold-Plated Mini Stereo Plug and
1
⁄ 4
″
Phone Adapter
RH100
Driver Unit:
40mm Diaphragm Drivers with Neodymium
Magnet
Frequency Unit:
20-22,000 Hz
Impedance:
64ohm ± 10%
Sensitivity:
106dB SPL at 1kHz ± 3dB
Input Connector:
Gold-Plated Mini Stereo Plug and
1
⁄ 4
″
Phone Adapter
PH60
Driver Unit:
34mm Mylar Drivers with An-isotropic Ferrite
Magnet
Frequency Unit:
20-18,000 Hz
Impedance:
32ohm ± 10%
Sensitivity:
101dB SPL at 1kHz ± 3dB
Input Connector:
Nickel-Plated Mini Stereo Plug and
1
⁄ 4
″
Phone Adapter
CH700
Closed back design
Driver Unit:
40mm Diaphragm Drivers with Neodymium
Magnet
Frequency Unit:
20 Hz–20 kHz
Impedance:
64ohms
Sensitivity:
108 dB S.P.L. @ 1 kHz ±3dB
Input Connector:
Gold-Plated Mini Stereo Plug and
1
⁄ 4
″
Phone Adapter
CH700
Closed back design
Driver Unit:
40mm Diaphragm Drivers with Neodymium
Magnet
Frequency Unit:
20 Hz–20 kHz
Impedance:
32ohms
Sensitivity:
103 dB S.P.L. @ 1 kHz ±3dB
Input Connector:
Gold-Plated Mini Stereo Plug and
1
⁄ 4
″
Phone Adapter