
Copyright 2018, Samson Technologies Corp. v2
Samson Technologies Corp.
278-B Duffy Ave
Hicksville, NY 11801
Phone: 1-800-3-SAMSON (1-800-372-6766)
www.samsontech.com
If you want to dispose this product, do not mix it with general household
waste. There is a separate collection system for used electronic products
in accordance with legislation that requires proper treatment, recovery
and recycling.
Private household in the 28 member states of the EU, in Switzerland and Norway
may return their used electronic products free of charge to designated collection
facilities or to a retailer (if you purchase a similar new one).
For Countries not mentioned above, please contact your local authorities for a
correct method of disposal.
By doing so you will ensure that your disposed product undergoes the necessary
treatment, recovery and recycling and thus prevent potential negative effects on the
environment and human health.
Frequency response
10 Hz – 35 kHz (±0.2 dB typical) up to75
kHz (-1 dB)
Dynamic range
>140 dB
Maximum input
+15 dBu @ 41 Hz for <1% THD+N
Gain
+0.2 dB
Rejection 50/60 Hz
126 dB typical
Equivalent input noise
-115 dBu
Intermodulation distortion
0.003%
Total harmonic distortion
0.0006%
Input impedance
7.7 kΩ
Output impedance
600 Ω nominal
Ground Lift
Disconnects ground from input to output
connectors. Case is always grounded to
outputs.
Connectors
Input: XLR - 1/4” combo,
Output: XLR + 1/4” TRS
Chassis Construction
Powder coated, 14 gauge steel
Dimensions (L x W x D)
4.33” x 2.13” x 1.8”
110mm x 54mm x 46mm
Weight
0.7 lb / 0.32 kg
Note: All specifications are with a 50 Ω balanced source @ 1kHz, -10 dBu
and 10k load, except as noted.
At Samson, we are continually improving our products, therefore
specifications and images are subject to change without notice.
Specifications
Setup
The MLI1 can be quite useful on stage or in the studio as an interface for
connecting unbalanced audio sources to balanced sources or balanced
sources to unbalanced sources. The MLI1 can also be used to remove
hum or buzz caused by ground loops between two line-level devices.
Follow us:
@samson
@samsontech
@samson_technologies
Having Trouble with your
MLI1 Passive Isolation Box?
We can help!
CONTACT OUR SUPPORT TEAM:
[email protected]
Our experts can help you resolve
any issues you may be having.
•
Turn the volume controls of the audio system all the way down.
•
Connect the audio source to XLR - 1/4” combo INPUT jack.
•
Connect the OUTPUT to the input of an audio device using the 1/4”
or XLR connections.
•
Raise the level of the audio system to the appropriate level.
•
If you hear a hum or buzz set the GROUND LIFT switch to the LIFT
position.
Note: Inputs and outputs can be balanced or unbalanced. The MLI-1
can be used to convert unbalanced to balanced signals in either
direction.