Samson Media 7 5007-1, Mounting And Operating Instructions

Page: 53 / 124

EB 9510 EN 6-3
Operation
6.3 Examples for the operation
The differential pressure meter has two user levels with different access privileges: Mainte-
nance staff and Specialist .
Values and parameters can only be changed in the Specialist user level. See the 'Start-up
and configuration' section for more information on the user level and maximum password
protection.
If no settings are entered within five minutes, the display returns to the start screen and the
user level returns to Maintenance staff .
The instructions below apply to the general navigation through the menus of the differential
pressure meter and to changing the parameters.
Î
Description of the operating controls (see Fig. 6-1).
Example 1: changing the language
1. Press key (in start screen) to go to the main menu.
2.
Select [Start-up| 1] with or key and confirm with key.
3. Select [User level | 1.2] with or key and confirm with key.
4. Press key and select 'Specialist' with or key.
5. Press
key to confirm the setting.
It is now possible to change parameters in the differential pressure meter.
Changing the language:
1. Press key (in start screen) to go to the main menu.
2.
Select [Start-up| 1] with or key and confirm with key.
3. Select [Sprache/Language | 1.3] with or key and confirm with key.
4. Press key and select the required language with or key.
5. Press
key to confirm the setting.
The language has been changed.
Note
Tip