manualshive.com logo in svg

Samson LINK-IT, Installation Instructions

Share
Download
Samson LINK-IT Installation Instructions Download Page 2

© 2019 Samson Rope Technologies, Inc. All rights reserved.

  1/2019 2179 

Link-It™  is a trademark of Samson Rope Technologies, Inc.

SamsonRope.com

CORPORATE HEADQUARTERS

 

2090 Thornton Street, Ferndale, Washington 98248 USA

Tel

 +1.360.384.4669  

|

  

Fax

 +1.360.384.0572

Widen the shackle eye by pulling on the penetrating leg at the crossover point.  

Pull until the eye can fit over the button knot. 

Place the eye over the knot and rest the knot close to the crossover point. Secure the eye by 

pulling the same body leg in the opposite direction. Tighten the eye by hand.

FINISHED TWO-PASS INSTALLATION. As the shackle is loaded the legs will adjust and balance.

5

6

7

Summary of Contents for LINK-IT

Page 1: ...ss than the desired shackle overall length Place the button knot between the two bearing points Avoid placing the base of the tail on the bearing point if possible Thread the shackle eye end around the other bearing point For a 2 pass system thread the shackle eye through the first and second bearing points again Balance the length of each shackle leg as much as possible when loaded they will adju...

Page 2: ...0 384 4669 Fax 1 360 384 0572 Widen the shackle eye by pulling on the penetrating leg at the crossover point Pull until the eye can fit over the button knot Place the eye over the knot and rest the knot close to the crossover point Secure the eye by pulling the same body leg in the opposite direction Tighten the eye by hand FINISHED TWO PASS INSTALLATION As the shackle is loaded the legs will adju...

Reviews:

No comments

Brands by name

Popular brands

Load more brands