background image

Safety Instructions/Consignes de sécurité/Sicherheitsvorkehrungen

ACHTUNG: 

Um die Gefahr eines Brandes oder Stromschlags zu verringern, sollten Sie dieses Gerät weder Regen noch Feuchtigkeit aussetzen.Um die Gefahr eines 

Stromschlags zu verringern, sollten Sie weder Deckel noch Rückwand des Geräts entfernen. Im Innern befinden sich keine Teile, die vom Anwender gewartet 

werden können. Überlassen Sie die Wartung qualifiziertem Fachpersonal.Der Blitz mit Pfeilspitze im gleichseitigen Dreieck soll den Anwender vor nichtisolierter 

“gefährlicher Spannung” im Geräteinnern warnen. Diese Spannung kann so hoch sein, dass die Gefahr eines Stromschlags besteht. Das Ausrufezeichen im gleich-

seitigen Dreieck soll den Anwender auf wichtige Bedienungs- und Wartungsanleitungen aufmerksam machen, die im mitgelieferten Informationsmaterial näher 

beschrieben werden. 

Wichtige Sicherheitsvorkehrungen

1.   Lesen Sie alle Anleitungen, bevor Sie das Gerät in Betrieb nehmen. 

2.   Bewahren Sie diese Anleitungen für den späteren Gebrauch gut auf.  

 

3.   Bitte treffen Sie alle beschriebenen Sicherheitsvorkehrungen.  

4.   Befolgen Sie die Anleitungen des Herstellers.   

5.  Benutzen Sie das Gerät nicht in der Nähe von Wasser oder Feuchtigkeit. 

6.   Verwenden Sie zur Reinigung des Geräts nur ein feuchtes Tuch.  

7.   Blockieren Sie keine Belüftungsöffnungen. Nehmen Sie den Einbau des Geräts nur entsprechend den Anweisungen des Herstellers vor. 

8.    Bauen Sie das Gerät nicht in der Nähe von Wärmequellen wie Heizkörpern, Wärmeklappen, Öfen oder anderen Geräten (inklusive Verstärkern) ein, die Hitze 

erzeugen.  

9.    Setzen Sie die Sicherheitsfunktion des polarisierten oder geerdeten Steckers nicht außer Kraft. Ein polarisierter Stecker hat zwei flache, unterschiedlich breite 

Pole. Ein geerdeter Stecker hat zwei flache Pole und einen dritten Erdungsstift. Der breitere Pol oder der dritte Stift dient Ihrer Sicherheit. Wenn der vorhan-

dene Stecker nicht in Ihre Steckdose passt, lassen Sie die veraltete Steckdose von einem Elektriker ersetzen.  

10.   Schützen Sie das Netzkabel dahingehend, dass niemand darüber laufen und es nicht geknickt werden kann. Achten Sie hierbei besonders auf Netzstecker, 

Mehrfachsteckdosen und den Kabelanschluss am Gerät.  

11.   Ziehen Sie den Netzstecker des Geräts bei Gewittern oder längeren Betriebspausen aus der Steckdose.  

12.   Überlassen Sie die Wartung qualifiziertem Fachpersonal. Eine Wartung ist notwendig, wenn das Gerät auf irgendeine Weise, beispielsweise am Kabel oder 

Netzstecker beschädigt wurde, oder wenn Flüssigkeiten oder Objekte in das Gerät gelangt sind, es Regen oder Feuchtigkeit ausgesetzt war, nicht mehr wie 

gewohnt betrieben werden kann oder fallen gelassen wurde.

WARNING

: To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture. To reduce the hazard of electrical shock, do not remove cover or 

back. No user serviceable parts inside. Please refer all servicing to qualified personnel.The lightning flash with an arrowhead symbol within an equilateral triangle, 

is intended to alert the user to the presence of uninsulated "dangerous voltage" within the products enclosure that may be of sufficient magnitude to constitute 

a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and 

maintenance (servicing) instructions in the literature accompanying the product.

Important Safety Instructions

1.   Please read all instructions before operating the unit. 

2.   Keep these instructions for future reference.

3.   Please heed all safety warnings. 

4.   Follow manufacturers instructions.   

5.  Do not use this unit near water or moisture. 

6.   Clean only with a damp cloth.  

7.   Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions. 

8.    Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.   

9.    Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type 

plug has two blades and a third grounding prong. The wide blade or third prong is provided for your safety. When the provided plug does not fit your outlet, 

consult an electrician for replacement of the obsolete outlet.  

10.  Protect the power cord from being walked on and pinched particularly at plugs, convenience receptacles and at the point at which they exit from the unit.  

11.   Unplug this unit during lightning storms or when unused for long periods of time.  

12.   Refer all servicing to qualified personnel. Servicing is required when the unit has been damaged in any way, such as power supply cord or plug damage, or if 

liquid has been spilled or objects have fallen into the unit, the unit has been exposed to rain or moisture, does not operate normally, or has been dropped.

ATTENTION:

 Pour éviter tout risque d’électrocution ou d’incendie, ne pas exposer cet appareil à la pluie ou à l’humidité. Pour éviter tout risque d’électrocution, ne 

pas ôter le couvercle ou le dos du boîtier. Cet appareil ne contient aucune pièce remplaçable par l'utilisateur. Confiez toutes les réparations à un personnel qualifié. 

Le signe avec un éclair dans un triangle prévient l’utilisateur de la présence d’une tension dangereuse et non isolée dans l’appareil. Cette tension constitue un 

risque d’électrocution. Le signe avec un point d’exclamation dans un triangle prévient l’utilisateur d’instructions importantes relatives à l’utilisation et à la mainte-

nance du produit.

Consignes de sécurité importantes

1.   Veuillez lire toutes les instructions avant d’utiliser l’appareil. 

2.   Conserver ces instructions pour toute lecture ultérieure.  

3.   Lisez avec attention toutes les consignes de sécurité. 

4.   Suivez les instructions du fabricant.   

5.   Ne pas utiliser cet appareil près d’une source liquide ou dans un lieu humide. 

6.   Nettoyez l’appareil uniquement avec un tissu humide.

7.   Veillez à ne pas obstruer les fentes prévues pour la ventilation de l’appareil. Installez l’appareil selon les instructions du fabricant. 

8.    Ne pas installer près d’une source de chaleur (radiateurs, etc.) ou de tout équipement susceptible de générer de la chaleur (amplificateurs de puissance par 

exemple). 

9.    Ne pas retirer la terre du cordon secteur ou de la prise murale. Les fiches canadiennes avec polarisation (avec une lame plus large) ne doivent pas être modi-

fiées. Si votre prise murale ne correspond pas au modèle fourni, consultez votre électricien. 

10.   Protégez le cordon secteur contre tous les dommages possibles (pincement, tension, torsion,, etc.). Veillez à ce que le cordon secteur soit libre, en particulier à 

sa sortie du boîtier.

11.   Déconnectez l’appareil du secteur en présence d’orage ou lors de périodes d’inutilisation prolongées. 

12.   Consultez un service de réparation qualifié pour tout dysfonctionnement (dommage sur le cordon secteur, baisse de performances, exposition à la pluie, pro-

jection liquide dans l’appareil, introduction d’un objet dans le boîtier, etc.). 

Summary of Contents for L2400





























Reviews: