Samson C COM16 Owner'S Manual Download Page 4

2

Congratulations on purchasing the C com 16, pre-set stereo compressor by Samson Audio! The C com 16 is a
compact, high-quality device that provides extensive dynamics processing and control that has previously only
been found in expensive outboard devices. The C com 16 is the easiest to operate compressor ever made.
Period! The easy operation makes the C com 16 the perfect solution for dynamics processing in live sound,
and also, particularly for tracking in recording situations. With the 15 factory programmed Dynamics Pre-sets
covering a wide range of applications, it’s simple to dial up a dynamics program that’s perfect for your gig or
project.  And for you tweekazoids, there is a full Manual mode offering variable control for Sensitivity, Ratio,
Attack and Release. The C com 16 lets you add a powerful ENHANCER circuit to any Pre-set, or in manual
mode, adding a pleasant restoration of high frequencies that can sometimes be diminished during heavy gain
reduction. To help you monitor and set the best levels, the C com 16 features easy to read five segment, LED
bar VU meters for INPUT and OUTPUT level, as well as GAIN REDUCTION.  Like all Samson Audio C class
processors, the C com 16 can be stacked on other C class models, and can be set up on an angle using the
included tilting feet. The C com 16 is also a half-single rack space unit and can be rack mounted using the
Samson CRK2 dual rack-mount adapter. Most importantly, by providing transparent gain control and superb
audio fidelity, the C com 16’s signal path will impress the most critical listeners.  

Although this unit is designed for easy operation, we suggest you take some time out first to go through these
pages so you can fully understand how we’ve implemented a number of unique features. In this manual, you’ll
find a more detailed description of the features of the C com 16, as well as a guided tour through the front and
rear panels, step-by-step instructions for using the C com 16 and full specifications. You’ll also find a warranty
card enclosed—please don’t forget to fill it out and mail it so that you can receive online technical support and
so we can send you updated information about other Samson products in the future.

With proper care and adequate air circulation, your C com 16 will operate trouble free for many years. We rec-
ommend you record your serial number in the space provided below for future reference.

Serial number:

Date of purchase:

Should your unit ever require servicing, a Return Authorization number (RA) must be obtained before shipping
your unit to Samson. Without this number, the unit will not be accepted. Please call Samson at 1-800-3SAM-
SON (1-800-372-6766) for a Return Authorization number prior to shipping your unit. Please retain the original
packing materials and if possible,  return the unit in the original carton and packing materials.

Introduction

Summary of Contents for C COM16

























Reviews: