AirLine Micro Earset
Owners Manual
5
7 .
Turn on your AH2 transmitter by pressing and holding the Multi-Function Switch, until the Status Indicator LED flashes
GREEN, then release it . The AH2 Status Indicator will now light steady GREEN . The AR2 receiver Status Indicator will change
from YELLOW to GREEN indicating that it is receiving a valid RF signal .
8 .
Position the AH2 on your head, as illustrated on page 7 .
9 .
Turn on your connected amplifier and/or mixer, but keep its volume all the way down . Make sure the AH2 transmitter is not
muted .
Note: If the AH2 is muted, the AH2 Status Indicator LED will flash GREEN and the AR2 Status Indicator will flash GREEN. To unmute
the AH2, press the Multi-Function Switch and the Status Indicator will light steady GREEN.
10 . Speak or sing into the earset microphone at a normal performance level while slowly raising the audio input control of your
amplifier or mixer, until the desired volume is reached .
11 . If you hear distortion at the desired volume level, check to see whether the Status Indicator LED on the receiver is lighting
RED . If it is not lit, make sure that the gain structure of your audio system is set correctly (consult the owners manual of your
mixer and/or amplifier for details) . If the Status Indicator is RED, simply move the microphone further from your mouth .
If you hear a weak, noisy signal at the desired volume level, make sure that the gain structure of your audio system and the
Audio Output Level switch are correctly set . If the Audio Output Level switch is correctly set and the signal coming from the
receiver is still weak and/or noisy, simply position the microphone closer to your mouth .
Quick Start
Summary of Contents for AirLine MICRO
Page 1: ......
