background image

AirLine 88x Wireless System

3

Important Safety Information

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR 
BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE 
PERSONNEL.

This lightning flash with arrowhead symbol within an equilateral triangle is 
intended to alert the user to the presence of non-insulated “dangerous voltage” 
within the product’s enclosure that may be of sufficient magnitude to constitute 
a risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert the user 
to the presence of important operating and maintenance instructions in the 
literature accompanying the appliance.

ATTENTION

RISQUE D’ÉLECTROCUTION !

NE PAS OUVRIR !

WARNING

TO PREVENT FIRE OR SHOCK HAZARD. DO NOT USE THIS PLUG WITH AN EXTENSION 
CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED 
TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD. DO NOT EXPOSE 
THIS APPLIANCE TO RAIN OR MOISTURE. TO PREVENT ELECTRICAL SHOCK, MATCH WIDE 
BLADE PLUG TO WIDE SLOT AND FULLY INSERT.

 If you want to dispose this product, do not mix it with general household waste. There is 
a separate collection system for used electronic products in accordance with legislation 
that requires proper treatment, recovery and recycling.
Private household in the 28 member states of the EU, in Switzerland and Norway may 

return their used electronic products free of charge to designated collection facilities or to a 
retailer (if you purchase a similar new one).
For Countries not mentioned above, please contact your local authorities for a correct method of 
disposal.
By doing so you will ensure that your disposed product undergoes the necessary treatment, 
recovery and recycling and thus prevent potential negative effects on the environment and 
human health.

Summary of Contents for AirLine 88 Series





















Reviews: