Samson 3375 Mounting And Operating Instructions Download Page 10

Page: 10 / 130

1-4

EB 8332-2 EN

Safety instructions and measures

1.1 Notes on possible severe personal injury

DANGER

Risk of fatal injury due to electric shock.

Before connecting wiring, performing any work on the device or opening the de-
vice, disconnect the supply voltage and protect it against unintentional reconnec-
tion.

Only use power interruption devices that can be protected against unintentional re-
connection of the power supply.

Do not remove any covers to perform adjustment work on live parts.

Risk of bursting in pressure equipment.

Valves and pipelines are pressure equipment. Improper opening can lead to valve
components bursting.

Before starting any work on the control valve, depressurize all plant sections affect-
ed as well as the valve.

Drain the process medium from all the plant sections affected and from the valve.

Wear recommended personal protective equipment (see associated valve docu-
mentation).

1.2 Notes on possible personal injury

WARNING

Crush hazard arising from moving parts.

The electric actuator contains moving parts (actuator and plug stems), which can injure

hands or fingers if inserted into the actuator.

Do not insert hands or finger into the yoke while the valve is in operation.

Disconnect the supply voltage and protect it against unintentional reconnection be-
fore performing any work on the control valve.

Do not impede the movement of the actuator or plug stem by inserting objects into
their path.

Summary of Contents for 3375



































































































































Search results

Summary of Contents for 3375

Reviews:

Related manuals for 3375

Brands by name

Popular brands

Samson 3375, Mounting And Operating Instructions

Search results

Summary of Contents for 3375

Reviews:

Related manuals for 3375

Brands by name

Popular brands