Samson 3275A, Mounting And Operating Instructions, Page: 41 / 52

EB 8314-1 EN 11-1
Removal
11 Removal
The work described in this section is only to
be performed by personnel appropriately
qualified to carry out such tasks.
Before removing the valve, make sure the fol-
lowing conditions are met:
− The actuator is put out of operation (see
the 'Decommissioning' section).
11.1 Removing the actuator
from the valve
See Fig. 11-1
1. Remove external piping.
2. Remove the clamps of the stem connec-
tor.
3. Unscrew the stem connector nut and lock
nut from the valve.
4. Unscrew the ring nut on the valve bon-
net.
5. Separate the actuator from the valve by
undoing the ring nut.
6. Fasten the lock nut and stem connector
nut on the valve.